2.9 - Installing the Power Supply
There are two power connectors on your Tomcat i7230W S5162. The Tomcat
i7230W S5162 requires that you use an EPS12V power supply that has a 24-
pin and an 8-pin power connector. Please be aware that ATX 2.x, ATX12V and
ATXGES power supplies are not compatible with the motherboard and can
damage.
Applying power to the board
1.
Connect the EPS 12V 8-pin power connector.
2.
Connect the EPS 12V 24-pin power connector.
3.
Connect power cable to power supply and power outlet
YOU MUST unplug the power supply before plugging the power
NOTE
cables to motherboard connectors.
30
http://www.tyan.com