Connecting The System To The Network; Connecting To Internal Network - Alcatel-Lucent OMNIACCESS 740 Hardware User's Manual

Alcatel-lucent network router user manual

Hide thumbs Also See for OMNIACCESS 740:

Getting started manual (25 pages)

Table Of Contents

Table of Contents

ONNECTING THE

This section details the procedure to connect to your OA-740 through the internal

or external network.

ONNECTING TO

NTERNAL

To access the OA-740 through hosts in internal network/LAN, you can use the

following:

•

Accessing OA-740 Through GUI

•

Connecting Through Telnet

•

Connecting Through SSH

OA-740 T

CCESSING

HROUGH

Follow the procedure given below to access and configure the OA-740 through a

GUI.

Note:

To access the OA-740 through the GUI, an IP interface must be configured in your

system.

Step 1: Configure IP address of an interface.

To configure an IP address of a given interface, follow the steps detailed in the

"Accessing OA-740 Through CLI"

Step 2: Open a Web browser from your PC.

Step 3: In the address bar/field, type the IP address of the interface and press the

Enter key.

Example:

http://<ip address>

http://192.168.1.1/24

The login page for the Web GUI is displayed in the browser window.

Step 4: Enter the user name and password, and press the Enter key. This will

launch a web interface to configure your OA-740.

For further configuration of your OA-740, refer to the OmniAccess 700 Web GUI

User Guide provided in the OA-740 Documentation CD.

OmniAccess 740 Hardware User's Guide

Beta

Except on the first page, right running head:

Heading1 or Heading1NewPage text (automatic)

YSTEM TO THE

ETWORK

GUI

section of this document.

Alcatel-Lucent