PROEL BM01 Instruction Manual page 11

Objects or liquid entry inside the unit:
Be careful that no objects fall or liquid is spilled inside the unit through ventilation openings.
Safe power line use:
•
Keep firmly the plug and the wall outlet while disconnecting the unit from AC power.
•
When the unit will not be used for a long period of time, please unplug the power cord from AC power outlet.
•
To avoid unit power cord damaging, please don't strain the AC power cable and don't bundle it.
•
In order to avoid unit power cord damaging, please be sure that the power cord is not walked on or pinched by heavy objects.
Unit relocation:
Before any unit relocation please control the unit is turned off. The power cord must be unplugged by the wall outlet, and all the
connections wires should be disconnected as well.
Don't open this unit:
Don't attempt to open or to repair by yourself this unit. For any problem solution not described in this owner's manual, please refer
to qualified personnel only or consult us or your National Distributor. Any improper operation could result in fire or electric shock.
Damages requiring services:
•
Don't attempt to do operations not described in this user's manual.
•
In the following cases please refer to an authorized maintenance center or skilled personnel:
- When the unit works improperly or it doesn't work at all.
- If power cord or plug are damaged.
- If liquid has spilled, or objects have fallen into the unit.
- The unit has been exposed to rain.
- The unit doesn't operate normally o it exhibits a marked change in performance.
- If the product has dropped or it has been damaged in any way.
Maintenance:
The user shouldn't attempt maintenance operation not described in this user's manual. Every maintenance operation should be
done by qualified personnel only.
IMPORTANT SAFETY INSTRUCTIONS:
•
Install this unit following owner's manual instructions.
•
Don't install, connect or disconnect power supply when the unit is powered, otherwise there's an high risk of electric shock.
•
Don't open the unit, there are no user serviceable parts inside.
•
If you detect a particular smell from the unit, please immediately turn it off and disconnect the AC power cord.
•
Don't block the unit ventilation openings.
•
Avoid using this unit in overload for a long period.
•
Don't force commands (switches, controls, etc.)
•
To obtain good speakers wire contacts, please tighten the screw terminals firmly.
•
For safety reason, don't defeat the grounding connection. Grounding is useful for user safety.
•
Use only connectors and accessories suggested by the manufacturer. .
•
This unit should be placed in a rack (see INSTALLATION) and kept far from:
Wet places
Direct exposure to heat sources (like sun light)
Non properly ventilated places
•
Disconnect the power cord during storms or when the unit is not used.
•
In order to prevent fire and electric shock risks, it's necessary to keep the unit far from sprinkling and drops. Please don't
put cups, vases or other object containing liquids over the unit. In case of interferences from source signal, THD value will
raise over 10%. Don't place this unit in a bookshelf o in other places with small room.
•
PROEL S.P.A. is not responsible for any damage that occurs due to a wrong unit installation.
USE LIMITATIONS:
Digital microphone stands BM01/BM04/BM08/BM16 are destined exclusively for audio applications use and exclusively with ZONE8
and MATRIX88.
Warranty purposes and return procedure:
Digital microphone stands are warranted in compliance with the characteristics and the specifications declared by the producer. The
period of warranty is 24 months from purchase date. Within the warranty period eventual defects linked to raw material or production
procedure must be opportunely communicated to the local reseller/distributor including the official purchase documentation and a
complete description of the defect risen. Defects due to tampering acts or improper use are excluded from warranty procedure.
Proel SpA -for authorized unit returns - will ensure the replacement of the detective parts or the unit repair when the defect declared
is covered by the warranty standards. Proel SpA company declines any compensation request for
eventual unit defects.
10
direct or indirect damages due to