General - Sony HCD-HPR90 - Receiver Component For Mini Hi-fi Systems Service Manual

– HPR90 –
Basic Operations
1 2 3 4 5
Playing a CD/MP3 disc
1
Select the CD function.
Press CD
2
Place a disc.
Press
disc with the label side up on the disc tray.
6
wa
7
w;
8
ql
9
qk
qj q;
qh
qg
To insert additional discs, slide the disc tray with your
finger as shown below.
qf qd qs qa
wl 1
ws
3
wk
qa
To close the disc tray, press
qs
wd
the unit again.
ql
w; Do not force the disc tray closed with your finger, as
wa
this may damage the unit.
6
3
Start playback.
wj qk
Press
9
pause)
wh
qj
wg
To
4
Pause playback
7
wf
Stop playback
Select a folder on an
MP3 disc
Before using the system
To use the remote
Slide and remove the battery compartment lid wf , and
insert the two supplied R6 (size AA) batteries, side
Select a track or file
first, matching the polarities shown below.
Find a point in a
track or file
Select Repeat Play
Notes on using the remote
Select a disc
• With normal use, the batteries should last for about six months.
• Do not mix an old battery with a new one or mix different types of
batteries.
• If you do not use the remote for a long period of time, remove the
batteries to avoid damage from battery leakage and corrosion. Switch to CD
function from
To set the clock
another source
1
Turn on the system.
Exchange other
Press (power) . discs while playing
2
Select the clock set mode.
To change the play mode
Press CLOCK/TIMER SET ws on the remote. If the
Press PLAY MODE
current mode appears on the display, press /
stopped. You can select normal play ("ALL DISCS" for
on the remote repeatedly to select "CLOCK SET"
all discs, "1DISC" for a disc, or "
and then press ENTER 9 on the remote.
in the folder on the disc), shuffle play ("ALL DISCS
3
Set the time.
SHUF," "1DISC SHUF," or "
Press / on the remote repeatedly to set
play ("PGM").
the hour, and then press ENTER 9 on the remote. * When playing a CD-DA disc,
operation as 1DISC (SHUF) Play.
Use the same procedure to set the minute.
When you turn off the system after setting the clock, Note on the jog dial
Only the first 6 characters are displayed when performing the folder
the clock display appears instead of the demonstration
search, track search, or file search.
display.
The clock settings are lost when you disconnect the Notes on Repeat Play
• All tracks or files on a disc are played repeatedly up to five times.
power cord or if a power failure occurs.
• You cannot select "REP" and "ALL DISCS SHUF" at the same
time.
• "REP 1" indicates that a single track or file is repeated until you
stop it.
Selecting a music source
Notes on playing MP3 discs
Press the following buttons (or press FUNCTION on
• Do not save other types of files or unnecessary folders on a disc that
the remote repeatedly). has MP3 files.
• Folders that have no MP3 files are skipped.
To select Press
• MP3 files are played back in the order that they are recorded onto
the disc.
CD CD on the remote.
• The system can only play MP3 files that have a file extension of
".MP3."
Tuner TUNER/BAND .
• If there are files on the disc that have the ".MP3" file extension,
Component (connected AUDIO IN ql .
but that are not MP3 files, the unit may produce noise or may
using an audio cord) malfunction.
• The maximum number of:
– folders is 255 (including the root folder).
– MP3 files is 511.
Adjusting the sound – MP3 files and folders that can be contained on a single disc is 512.
– folder levels (the tree structure of files) is 8.
• Compatibility with all MP3 encoding/writing software, recording
device, and recording media cannot be guaranteed. Incompatible
To adjust the volume
MP3 discs may produce noise or interrupted audio or may not play
Press VOLUME +/– on the remote (or turn the
at all.
VOLUME control on the unit) .
Notes on playing multisession discs
To add a sound effect • If the disc begins with a CD-DA (or MP3) session, it is recognized
as a CD-DA (or MP3) disc, and other sessions are not played back.
To Press • A disc with a mixed CD format is recognized as a CD-DA (audio)
disc.
Generate a more dynamic DSGX on the unit.
sound (Dynamic Sound
Generator X-tra)
Set the sound effect EQ wg on the remote
repeatedly to select "BASS"
or "TREBLE," and then
press +/– on the remote
repeatedly to adjust the level.
SECTION 2

GENERAL

Listening to the radio
1
Select "FM" or "AM."
Press TUNER/BAND
on the remote.
2
Select the tuning mode.
Press TUNING MODE
(CD open/close) on the unit, and place a
appears.
3
Tune in the desired station.
Press +/– on the remote (or TUNING +/– on the unit)
. Scanning stops automatically when a station is
tuned in, and then "TUNED" and "STEREO" (for
stereo programs) appear.
To stop automatic scanning
Press (stop) .
To tune in a station with a weak signal
If "TUNED" does not appear and the scanning does
not stop, press TUNING MODE
"AUTO" and "PRESET" disappear, and then press
+/– on the remote (or TUNING +/– on the unit)
repeatedly to tune in the desired station.
To reduce static noise on a weak FM stereo
(CD open/close) on
station
Press FM MODE
to turn off stereo reception.
Changing the display
(play) wj on the remote (or CD/ (play/
on the unit).
To change
Press Information on
the display*
(pause) wj on the remote (or
CD/ (play/pause) on the
Display mode
unit). To resume play, press the
(See below.)
button again.
* For example, you can view CD/MP3 disc information, such as the
(stop) .
track or file number or folder name during normal play, or the total
play time while the player is stopped.
+/– (select folder) . Or
The system offers the following display modes.
turn the jog dial on the unit
and press PUSH ENTER on
Display mode
the unit (turn the jog dial on
Demonstration
the unit during playback until
"GROUP" appears, and then
press PUSH ENTER on the
unit to select the desired folder). Clock
Power Saving
/ (go back/go forward)
Mode 2)
. Or turn the jog dial on
the unit and press PUSH ENTER
on the unit. To cancel, press
1) The STANDBY indicator lights up when the system is off.
CANCEL on the unit.
2) When the system is in Power Saving Mode, the following functions
are unavailable:
Hold down / (rewind/fast
– setting the clock
forward) during playback,
– changing the AM tuning interval
and release the button at the
– changing the CD power manage function
desired point.
Notes on the display information
REPEAT repeatedly until
• The following are not displayed;
– total playing time for a CD-DA disc depending on the play mode.
"REP" or "REP1" appears.
– total playing time for an MP3 disc.
DISC SKIP on the remote (or
– remaining playing time for an MP3 file.
DISC 1 – 5 or DISC SKIP
• The following are not displayed correctly;
(in stop mode) on the unit).
– elapsed playing time of an MP3 file encoded using a VBR
(variable bit rate).
DISC 1 – 5 on the unit
– folder and file names that do not follow either the ISO9660 Level
(Automatic Source Selection).
1, Level 2 or Joliet in the expansion format.
• The following are displayed;
– ID3 tag information for MP3 files when ID3 version 1 and version
EX-CHANGE on the unit.
2 tags are used.
– up to 62 characters of ID3 tag information using uppercase letters
(A to Z), numbers (0 to 9), and symbols (" $ % ' ( ) * + , – . / < =
> @ [ \ ] _ ` { | } ! ? ^).
repeatedly while the player is
Using optional audio
*" for all MP3 files
components
SHUF*"), or program
To connect an optional headphones
(SHUF) Play performs the same
Connect headphones to the PHONES jack
unit.
To connect an optional component
Connect additional audio component to the AUDIO
IN jack on the unit using an audio analog cord (not
supplied). Turn down the volume on the system, and then
press FUNCTION
the AUDIO IN function.
Other Operations
Creating your own CD program
(Program Play)
repeatedly.
Use buttons on the remote to create your own program.
1
Press CD to select the CD function.
repeatedly until "AUTO"
2
Press PLAY MODE
appears while the player is stopped.
3
Press DISC SKIP
4
Press /
dial on the unit until the desired track number
appears.
When programming MP3 files, press
folder) repeatedly or turn the jog dial
unit to select the desired folder, and then select the
desired file.
Current disc
Selected track
or file number
repeatedly until
Loaded disc
repeatedly until "MONO" appears
5
Press ENTER to add the track or file to the
9
program.
"– –.– –" appears when the total time exceeds 100
minutes for a CD, or when you select a CD track
whose number is 21 or over, or when you select an
Press
MP3 file.
DISPLAY repeatedly when the
6
Repeat steps 4 through 5 to program additional
system is on.
tracks or files, up to a total of 25 tracks or files.
DISPLAY repeatedly when the
7
To play your program of tracks or files, press
system is off.
(play) .
wj
The program remains available until you open the disc
tray. To play the same program again, select the CD
function, and press
When the system is off, 1)
To cancel Program Play
The clock display is replaced by
Press PLAY MODE repeatedly until "PGM"
lighting and flashing of the display
disappears while the player is stopped.
window.
The clock is displayed.
To delete the last track or file of the program
The display is turned off to conserve
Press CLEAR while the player is stopped.
power. The timer and clock continue wh
to operate.
To view program information, such as total
track number of the program
Press DISPLAY repeatedly.
Tip
You can program additional tracks or files during playback by using
the jog dial.
Presetting radio stations
You can preset your favorite radio stations and tune
them in instantly by selecting the corresponding preset
number.
Use buttons on the remote to preset stations.
1
Tune in the desired station (see "Listening to the
radio").
2
Press TUNER MEMORY
on the
3
Press +/– repeatedly to select your desired
preset number.
If another station is already assigned to the selected
preset number, the station is replaced by the new
on the remote repeatedly to select stations.
4
Press ENTER .
9
5
Repeat steps 1 through 4 to store other stations.
You can preset up to 20 FM and 10 AM stations. The
preset stations are retained for about half a day even
if you disconnect the power cord or if a power failure
occurs.
6
To call up a preset radio station, press TUNING
MODE repeatedly until "PRESET" appears,
and then press +/–
desired preset number.
HCD-HPR90/HPR99XM
This section is extracted from
instruction manual.
Using the Timers
The system offers two timer functions. If you use Play
Timer with the Sleep Timer, the Sleep Timer has priority.
Sleep Timer:
You can fall asleep to music. This function works even if
repeatedly until "PGM"
the clock is not set.
Press SLEEP wl on the remote repeatedly. If you select
to select a disc.
"AUTO," the system automatically turns off after the
repeatedly or turn the jog
current disc stops or in 100 minutes.
Play Timer:
You can wake up to CD or tuner at a preset time.
+/– (select
on the
Use buttons on the remote to control the Play Timer.
Make sure you have set the clock.
1
Prepare the sound source.
Prepare the sound source, and then press VOLUME
+/– to adjust the volume.
Total playing time of program
(including selected track or file)
To start from a specific CD track or MP3 file, create
your own CD program.
2
Press CLOCK/TIMER SET
3
Press / repeatedly to select "PLAY
SET" then press ENTER
"ON" appears, and the hour indication flashes.
4
Set the time to start playing.
Press / repeatedly to set the hour,
and then press ENTER
The minute indication flashes. Use the procedure
above to set the minute.
5
Use the same procedure as in step 4 to set the
time to stop playing.
6
Select the sound source.
Press / repeatedly until the desired
sound source appears, and then press ENTER
display shows the timer settings.
7
Press (power)
The system turns on 15 seconds before the preset
(play) wj .
time.
If the system is on at the preset time, the Play Timer
will not play.
To activate or check the timer again
Press CLOCK/TIMER SELECT
repeatedly until "PLAY SEL" appears, and then press
ENTER 9 .
To cancel the timer
Repeat the same procedure as above until "TIMER OFF"
appears, and then press ENTER
To change the setting
Start over from step 1.
Tip
The Play Timer setting remains as long as the setting is not canceled
manually.
wk .
Preset number
repeatedly to select the
.
ws
9 .
9 .
9 . The
to turn off the system.
ws
, press /
9 .
5