JRC NSVS776 Manual

JRC SAW FILTER
Application
374MHz WLAN
Electrical Specification: (Table 1)
The device characteristics are measured in the circuit shown in Fig.1.
Table 1. Electrical Specifications
Parameter
Input and Output Impedance
Nominal Center Frequency (f0)
Insertion Loss
Passband Ripple
Group Delay Ripple
Out of Band Rejection
(Relative to Minimum
Insertion Loss)
Maximum Rating: (Table 2)
Table 2. Maximum Ratings
Parameter
Maximum Input Power
Maximum DC Voltage
Operating Temperature Range
Storage Temperature
Mechanical Specification: (Fig.2)
Package is designed as small as 5.2x4.5x1.5[mm
Notice:
This part is electrostatic discharge sensitive and may be damaged by improper handling.
Communications Equipment Marketing Department
http://www.jrc.co.jp/jp/product/device/saw/index.html (Japanese)
http://www.jrc.co.jp/eng/product/saw/index.html(English)
NSVS776
365.5~382.5MHz
366.5~381.5MHz
366.5~381.5MHz
274~341MHz
341~352MHz
352~357.5MHz
390.5~396MHz
396~430MHz
430~474MHz
(Operating Temperature Range: -30~+80ºC)
Communications Equipment Division
10-1, Nishi-Shinjuku 6-chome, Shinjuku-ku,
Tokyo, 160-8328 Japan
Tel. +81 3-3348-3845
Fax. +81 3-3348-3935
Spec.
-
- 374MHz
12.0dB max.
1.0dB max.
100nsec max.
40dB min.
40dB min.
35dB min.
30dB min.
35dB min.
40dB min.
Rating
+10dBm
7.5V
-30~+80ºC
-30~+80ºC
3
] for SMD (Surface Mount Device) type.
NSVS776 Jan. 2005
Typ.
50Ω
8.0dB
0.8dB
50nsec
45dB
42dB
37dB
37dB
37dB
45dB