JRC NSVS1127 Manual

JRC SAW FILTER
Application
915.0MHz(BW=26MHz) ISM
Electrical Specification: (Table 1)
The device characteristics are measured in the circuit shown in Fig.1.
Item
Input and Output Impedance
Nominal Center Frequency (f0)
Insertion Loss
Response Variation
Input and Output VSWR
Out of Band Rejection
(Relative toThrough Level)
Maximum Rating: (Table 2)
Table2. Maximum Ratings
Item
Maximum Input Power
Maximum DC Voltage
Operating Temperature Range
Storage Temperature
Mechanical Specifications: (Fig.2)
Package is designed as small as 3.0x3.0x1.15[mm
Notice:
This part is electrostatic discharge sensitive and may be damaged by improper handling.
Communications Equipment Marketing Department
http://www.jrc.co.jp/jp/product/device/saw/index.html (Japanese)
http://www.jrc.co.jp/eng/product/saw/index.html(English)
NSVS1127
902.0~928.0MHz
902.0~928.0MHz
902.0~928.0MHz
DC~800.0MHz
(
800.0~845.0MHz
845.0~880.0MHz
947.0~992.0MHz
992.0~1020.0MHz
1020.0~1200.0MHz
Rating
+10dBm
7.5V
-40~+85ºC
-40~+85ºC
Communications Equipment Division
10-1, Nishi-Shinjuku 6-chome, Shinjuku-ku,
Tokyo, 160-8328 Japan
Tel. +81 3-3348-3845
Fax. +81 3-3348-3935
Spec.
-
-
3.6dB(*3.4dB) max.
1.7dB(*1.5dB) max.
2.5 max.
38dB min.
35dB min.
17dB min.
20dB min.
38dB min.
20dB min.
(Operating Temperature Range : -40~+85ºC)
(*Operating Temperature Range : -20~+70ºC)
3
] for SMD (Surface Mount Device) type.
NSVS1127 Oct. 2004
Typ.
50Ω
915MHz
2.8dB
0.8dB
1.8
43dB
40dB
30dB
28dB
43dB
27dB