Dram Frequency; Dram Timing Configuration; Voltage Configuration - Biostar TPOWER I45 Setup Manual

FSB(Bsel) To NorthBridge Latch
This item allows you to select the FSB Frequency.

DRAM Frequency

To get better system performance, sometimes downgrading the memory
frequency is necessary when CPU frequency is adjusted over the upper
limit.
DDR2 Enhanced Mode
This item allows you to control the DDR2 ram enhanced mode.

DRAM Timing Configuration

Enter this item for more advanced DRAM timing settings.
Clock Gen Configuration
Enter this item for more advanced Clock Gen settings.

Voltage Configuration

Enter this item for more advanced voltage settings.
NOTE
Overclock is an optional process, but not a "must-do" process; it is not
recommended for inexperienced users. Therefore, we will not be responsible
for any hardware damage which may be caused by overclocking. We also
would not guarantee any overclocking performance.
Automatic Overclock System (A.O.S.)
For beginners in overclock field, BET had developed an easy, fast, and
powerful feature to increase the system performance, named A.O.S.
Based on many tests and experiments, A.O.S. provides 3 ideal overclock
configurations that are able to raise the system performance in a single step.
Main Advanced
Over-Clocking Navigator setting
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Over-Clocking Navigator
=========== Automate OverClock System ===========
Auto OverClock System
============ Manual OverClock System ============
Intel(R) SpeedStep(tm) tech
Ratio CMOS Setting
CPU Frequency Setting
FSB(Bsel) To NorthBridge Latch [Auto]
DRAM Frequency
DDR2 Enhanced Mode
> DRAM Timing Configuration
> Clock Gen Configuration
> Voltage Configuration
Memory Test
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
BIOS SETUP UTILITY
PCIPnP Boot Chipset
[Normal]
[V6-Tech Engine]
Options
[Enabled]
Normal
[ x9.0]
Automate OverClock
[333]
Manual OverClock
[Auto]
[Auto]
[Disabled]
TPower I45
O.N.E Exit
Options
Normal
Automate OverClock
Manual OverClock
Select Screen
Select Item
Enter
Go to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit
29