Trueimagecmd.exe Usage Examples - ACRONIS BACKUP RECOVERY 10 SERVER FOR WINDOWS - COMMAND LINE Cli Reference Manual

1.1.4

trueimagecmd.exe usage examples

1.1.4.1 Image disks and partitions

The following command will create an image named 1.tib of partitions 2-1 and 1-3:
trueimagecmd /create /filename:"C:\Test\1.tib" /partition:2-1,1-3
The image will be saved to the C:\Test\ folder.

The following command will create an image of partitions 2-1 and 1-3 in the Acronis Secure Zone:
trueimagecmd /create /asz /partition:2-1,1-3

The following command will create an image named 1.tib of partitions 2-1 and 1-3:
trueimagecmd /create /filename:"\Test\1.tib" /partition:2-1,1-3
/file_partition:3-1
The image will be saved in the folder \Test on partition 3-1.

The following command will append an incremental image to the image named 1.tib of hard disk
2:
trueimagecmd /create /filename:"C:\Test\1.tib" /password:qwerty
/harddisk:2 /reboot /raw /incremental /compression:5 /split:640
/progress:off
The image will be saved to C:\Test\ folder, protected with password "qwerty", split into 640-MB
parts, and contain all cluster data. Image compression level is 5. The server will be rebooted after
the operation is completed.

The following command will create an image of partition 2-1 named arc.tib in the shared folder
\\server1\folder:
trueimagecmd /create /partition:2-1 /filename:\\server1\folder\arc.tib
/net_user:user1 /net_password:pw1 /log:\\server2\dir\log1.log
/log_net_user:user2 /log_net_password:pw2
The operation log file log1.log will be saved on another share \\server2\dir\. Credentials for both
shares are provided.
 The following command will create an image of partition 2-1 in the archive.tib file located on the
FTP server:
trueimagecmd /create /partition:2-1 /filename:ftp://server/folder/archive.tib
/ftp_user:usr1 /ftp_password:pswd1
1.1.4.2 Restore disks and partitions

The following command will restore partition 2-1 from image 1.tib to the original location:
trueimagecmd /deploy /filename:"C:\Test\1.tib" /partition:2-1

The following command will restore hard disk 2 from image 1.tib, protected with password
'qwerty', to the original hard disk:
trueimagecmd /deploy /filename:"C:\Test\1.tib" /password:qwerty
/harddisk:2
 The following command will restore partition 2-1, stored in image 1.tib, to partition 1-1:
trueimagecmd /deploy /filename:"C:\Test\1.tib" /partition:2-1
/target_partition:1-1

The following command will restore partition 2-1, stored in image 1.tib, to hard disk 3:
trueimagecmd /deploy /filename:"C:\Test\1.tib" /partition:2-1
/target_harddisk:3 /start:63 /size:64000 /type:logical
Copyright © Acronis, Inc., 2000-2010 21