Backup Options; General Options - ACRONIS BACKUP RECOVERY 10 SERVER FOR LINUX - COMMAND LINE Cli Reference Manual

net_password:[password]
Specifies the password for logon to the network share to save the resulting archive.
include_pits:[pits numbers]
Specifies the backups (pits) to be included in the archive copy. To get the numbers of pits, use
pit_info. Separate multiple values with a comma, for example:
--include_pits:2,4,5
1.1.2.2

Backup options

incremental
Set the backup type to incremental.
If not specified or there is no basic full backup, a full backup will be created.
differential
Set the backup type to differential.
If not specified or there is no basic full backup, a full backup will be created.
compression:[0...9]
Specify the data compression level.
It ranges from 0 to 9 and is set to 3 by default.
split:[size in MB]
Split the backup into parts of the specified size, if the archive location is other than ASZ.
1.1.2.3

General options

oss_numbers
Declares that numbers of partitions in the partition option are adjusted for the MBR partition table
rather than be simple ascending numbers. This means that primary partitions have numbers 1-1, 1-2,
1-3, 1-4 and logical partitions numbers start with 1-5. For example, if the disk has one primary and
two logical partitions, their numbers can appear as follows:
--partition:1-1,1-2,1-3
or
--oss_numbers --partition:1-1,1-5,1-6
log:[file name]
Create a log file of the current operation with the specified file name.
8 Copyright © Acronis, Inc., 2000-2010