ACRONIS BACKUP AND RECOVERY 10 SERVER FOR LINUX - COMMAND LINE REFERENCE UPDATE 3 Cli Reference Manual page 16

If the vault option is specified the filename option is ignored.
arc:[archive name]
Used in combination with the vault option. Lists all backups contained in the archive.
If not specified, the arc_id option is used. If both the arc and arc_id options are specified, the arc_id
option is used.
arc_id:[archive id]
Used in combination with the vault option. Lists all backups of the selected archive.
If not specified, the arc option is used. If both the arc and arc_id options are specified, the arc_id
option is used.
1.1.3.10 asz_create
password:[password]
a) Password for the archive, if the archive location is other than ASZ.
b) Password for the ASZ, if archive location is ASZ.
harddisk:X
Specifies the hard disk number where the Acronis Secure Zone will be created.
partition:[partition number]
Specifies partitions from which free space will be taken for Acronis Secure Zone.
size:[ASZ size in sectors | unallocated]
Sets the Acronis Secure Zone size (in sectors).
If not specified, the size is set as an average between the maximal (unallocated space plus free space
on all partitions selected with the partition option) and minimal (about 35MB) values.
Either way, the program will first use the unallocated space. If there is not enough unallocated space,
the selected partitions will be decreased. Resizing of locked partitions requires a reboot.
With "unallocated", the zone will use all unallocated space on the disk. Partitions will be moved, if
necessary, but not resized. Moving of locked partitions requires a reboot. The partition option is
ignored.
1.1.3.11 asz_delete
partition:[partition number]
Specifies partitions to which free space will be added after the Acronis Secure Zone is deleted. If you
specify several partitions, the space will be distributed proportionally based on each partition's size.
16 Copyright © Acronis, Inc., 2000-2010