Deleting Acronis Secure Zone; Deleting Esx/Esxi Virtual Appliance - ACRONIS BACKUP AND RECOVERY 10 ADVANCED SERVER VIRTUAL EDITION - INSTALLATION UPDATE 3 Installation Manual

# cd /usr/lib/Acronis/BackupAndRecovery/uninstall
# ./uninstall
# cd /usr/lib/Acronis/BootableComponents/uninstall
# ./uninstall
# cd /usr/lib/Acronis/BackupAndRecoveryConsole/uninstall
# ./uninstall
# cd /usr/lib/Acronis/UpgradeTool/uninstall
# ./uninstall
3. Run the following command to delete the source files of the SnapAPI module:
# rm -rf /usr/src/snapapi*
To uninstall all components in the unattended mode, run each of the ./uninstall commands with the
-a option.

5.4 Deleting Acronis Secure Zone

Uninstallation of Acronis Backup & Recovery 10 does not affect Acronis Secure Zone and its contents.
You will still be able to recover data from Acronis Secure Zone on booting from bootable media.
If you need to delete Acronis Secure Zone, perform the following steps in the operating system
(before the agent uninstallation) or under bootable media.
To delete Acronis Secure Zone:
1. In the Acronis Secure Zone Actions bar (on the Actions and tools pane), select Delete.
2. In the Delete Acronis Secure Zone window, select volumes to which you want to add the space
freed from the zone and then click OK.
If you select several volumes, the space will be distributed proportionally to each partition. If you
do not select any volume, the freed space becomes unallocated.
After you click OK, Acronis Backup & Recovery 10 will start deleting the zone.

5.5 Deleting ESX/ESXi Virtual Appliance

Acronis Backup & Recovery 10 Management Server provides an easy way to remove Agent for ESX/ESXi from
ESX or ESXi servers. You might generally prefer that method to the procedure described later in this section.
Connect the console to the management server. In the Navigation tree, right click Virtual machines, then click
Remove ESX agent. Refer to the context help for further instructions.
You may need to manually delete the Agent for ESX/ESXi Virtual Appliance in the following cases:

The VA is not registered on the management server

You are not using vCenter Server or integration with vCenter Server is not enabled

The VA is corrupted.
To remove Agent for ESX/ESXi Virtual Appliance (VA) manually:
1. Start VMware Infrastructure/vSphere Client and log on to the ESX/ESXi host or to vCenter Server.
2. Power off the VA.
3. Right click the VA and select Edit settings.
4. Make sure the VA has only 4 hard disks.
If there are more than 4 hard disks, this means that some of the guest system volumes are not
unmounted from the VA. Native disks of the VA have numbers from 1 to 4 and either 5 GB or 1
MB size. Unmount the non-native disks as follows:
48 Copyright © Acronis, Inc., 2000-2010