Upgrading Components For Windows; Upgrading To Advanced Editions Of Acronis Backup & Recovery 10 - ACRONIS BACKUP AND RECOVERY 10 ADVANCED SERVER SBS EDITION - INSTALLATION UPDATE 3 Installation Manual

You can do this later at any time, however, until that time backup to deduplicating vaults will fail.
To change a license in advanced editions:
1. Do either of the following:

Connect the console to the machine and click Help > Change license.

Connect the console to the management server, navigate to All physical machines or to
another group that displays the machine whose license you want to change, right-click the
machine, and then click Change license.
2. Do either of the following:

Specify the license server and then select the edition to switch to. If the Acronis
Deduplication or Acronis Universal Restore licenses for this edition are available on the
license server, specify whether to use each of these licenses.

Enter the trial license key.
To change licenses on multiple machines, we recommend using the remote installation functionality.
For more information, see Remote installation (Windows) (p. 17).

3.2 Upgrading components for Windows

Before upgrading to the full product version, you need to install Acronis License Server and import
the product license keys to it. If you are planning to use Acronis Backup & Recovery 10 Deduplication,
import the license key for this feature too.
The license keys for the full product version must be of the same product edition as the trial license
key.
To upgrade to the full product version
1. Make sure that the license keys are imported to the license server.
2. Start the setup program.
3. Click Use licenses from the following Acronis License Server, and then specify the name or IP
address of the license server.
4. Select one of the following options:

To upgrade to the full product version and to add or remove components (for example, to
install Acronis Backup & Recovery 10 Deduplication), click Proceed with the installation.
Note: The deduplication functionality is enabled in the trial product version. To continue using it in the full
version, you need to install Acronis Backup & Recovery 10 Deduplication. This requires a separate license
key.

To upgrade to the full product version without adding or removing components, click Apply
the new license key and quit the Setup.
The installed components are now upgraded to the full version.
5. If you selected the first option, proceed with adding or removing components. If you selected the
second option, click Close to exit the setup program.
4 Upgrading to advanced editions of Acronis
Backup & Recovery 10
This section describes how to upgrade the following editions of Acronis True Image Echo:
26 Copyright © Acronis, Inc., 2000-2010