Suspend Remote Replication - Dell PowerVault MD3620f Command Line Interface Manual

Parameters
Parameter
target
source

Suspend Remote Replication

NOTE:
This command valid only with Fibre Channel storage arrays.
This command suspends a Remote Replication operation.
Syntax
suspend remoteReplication (primary
[primaryVirtualDiskName] |
primaries [primaryVirtualDiskName1 ...
primaryVirtualDiskNameN])
writeConsistency=(TRUE | FALSE)
Parameters
Parameter
primary or primaries
308
Script Commands
Description
Name of the target virtual disk for which to stop a virtual disk copy
operation. You must put brackets ([ ]) around the target virtual disk
name. If the target virtual disk name has special characters, you must
also put quotation marks (" ") around the target virtual disk name.
Name of the source virtual disk for which to stop a virtual disk copy
operation. You must put brackets ([ ]) around the source virtual disk
name. If the source virtual disk name has special characters, you
must also put quotation marks (" ") around the source virtual disk
name.
Description
The name of the virtual disk for which you want to
suspend operation. Enclose the virtual disk name in
square brackets ([ ]). If the virtual disk name has
special characters, also enclose the virtual disk
name in double quotation marks (" ").