The Printer Does Not Print; The Notebook Shuts Down Suddenly; A Component (E.g. Optical Drive) Is Not Detected Or Is Not Ready; The Wireless Components Are Not Available - Fujitsu FPCM11383 Easy Manual

Troubleshooting and tips

The printer does not print

Cause
Printer not ready-for-use
Data line interrupted between
notebook and printer
Wrong print driver installed

The notebook shuts down suddenly

Cause
If you are operating the notebook with
a battery, you may have overlooked
the reference to the low battery level
and the notebook has switched over
to Standby mode.

A component (e.g. optical drive) is not detected or is not ready

Cause
The component has been
deactivated.

The wireless components are not available

Cause
The wireless components have been
deactivated.
88
Troubleshooting
► Make sure that the printer is switched on and is
online (see the manuals supplied with the printer).
► Check that the cable connecting the notebook and
the printer is connected properly.
► Check that the correct printer driver is installed.
Troubleshooting
► Connect the mains adapter.
► Press the ON/OFF switch.
Troubleshooting
► Check whether the component has been
deactivated with the Eco Utility (if installed).
► Re-activate the component.
Troubleshooting
► Check whether the wireless components have been
deactivated with the Wireless Selector (if installed).
► Re-activate the wireless components.
A26391-K220-Z227-1-7619, edition 1