Labeling Optical Disks - HP 2600fx - Optical Disk Drive User Manual

Labeling Optical Disks

Make it a practice to label your optical disks. Adhesive labels are provided with
each disk. You can use the following labeling suggestions:
• date of format or initialization
• disk owner (group/department, etc.)
• storage purpose (backup, old version of operating system, etc.)
Apply the label to the optical disk in an area that does not interfere with the
movement of the metal shutter. On side A of an optical disk, the correct label
position is just to the left of the metal shutter; on side B, it is just to the right of
the metal shutter. See the figure below for proper label placement.
Caution
If a label is applied incorrectly, the optical disk may get caught in the drive.
.
Figure 2-1: Proper Label Positions
2-4