Getting Started; Introduction; Supported Systems Information - Dell PowerVault 110T DLT VS80 Quick Start Manual

Getting Started

Introduction

Your Dell™ PowerVault™ Data Protection Solution is preconfigured for quick
and simple deployment. Some configuration settings are unique to your IT
environment and must be entered upon initial use. This document provides
the information needed to configure the system for your specific IT
environment.
NOTE:
Prior to deploying your system, review the Dell PowerVault Data Protection
Solution Information Update for the latest information.
NOTE:
For documents referenced in this guide, see the Dell PowerVault Data
Protection Solution Quick Reference Guide at support.dell.com.

Supported Systems Information

The PowerVault Data Protection Solution is based on Microsoft
Center Data Protection Manager (DPM) 2007, which is preconfigured to run
on a Dell PowerVault system. It is important to know your PowerVault system
model when you require support from Dell, install additional hardware, or
reinstall the PowerVault Data Protection Solution software. Dell
OpenManage™ system management applications recognize and report your
system model information.
Table 1-1. PowerVault Data Protection Solutions and System Models
Data Protection Solution
PowerVault DP100
PowerVault DP500
PowerVault DP600
System Model
PowerVault 100
PowerVault 500
PowerVault 600
Getting Started
®
System
7