Configuring Livecycle Products To Access Ldap; Configuring Livecycle Products With Ldap - Adobe LIVE CYCLE 7.2 - INSTALLING AND CONFIGURING LIVECYCLE FOR JBOSS Manual

10

Configuring LiveCycle Products to Access LDAP

This chapter describes how to configure LiveCycle products with LDAP or LDAP over SSL (LDAPS).
"Configuring LiveCycle products with LDAP" on page 68
●
"Configuring LiveCycle products with LDAPS" on page 69
●

Configuring LiveCycle products with LDAP

Use the following procedure as a guideline when configuring User Management to support
authentication using LDAP.
➤
To configure User Management with LDAP:
1. Open a web browser, navigate to
"Accessing Administrator" on page
2. Select Settings > User Management > Domain Management and click New Domain.
3. In the ID box, type a unique identifier for the domain.
4. In the Name box, type a descriptive name for the domain.
5. Click Add Authentication and, in the Authentication Provider list, select LDAP.
Note:
6. Click OK.
7. Click Add Directory.
8. Under Populate Page With, select a directory settings option such as Default Sun ONE values.
9. Specify values in the Server, Port, SSL and Binding boxes as required. For details on the settings, see
Directory settings in the online help.
10. Configure the User Settings and Group Settings as required. For details on the settings, see Directory
settings in the online help.
11. (Optional) Test your configuration:
Click Test.
●
On the Test Directory pane, in the Find box, enter an object name and, in the using box, select the
●
object's type, such as Login ID.
Click Test. If successful, your object's details will be displayed, then click Back.
●
12. Click OK to exit the Add Directory page, and click OK again to exit.
JAAS has been deprecated for User Management in LiveCycle 7.2.
http://[host name]:[port]/adminui
26.)
, and log in. (See
68