Advertisement
OVERVIEW
The speaker rough-in kit offers installers a firm
template and speaker locator for drywall installers.
Made of ABS plastic, the bracket can withstand the
abuse during the construction process. Each kit con-
sists of two (2) speaker brackets and four (4) snap on
wings for affixing to each side of the stud opening.
INSTALLATION
1. Prepare the speaker bracket by snapping the
wings to each side of the speaker bracket rough-in
kit as shown in fig 1.
2. Locate the stud opening that best suits the speaker
application and attach each side of the wings to
the stud. It is important to think about speaker
depth, electrical components, HVAC and other
obstacles that may prohibit proper installation.
A minimum depth of 3.25" is needed in most
applications (see fig 2).
3. Pull the necessary wire to each of the brackets.
Each wing has a wire loop for securing during the
construction process (see fig 3). It is important to
use these loops so that the wire does not get lost
in the wall or ceiling.
4. Inform the drywall installer as to the nature of the
bracket and the use of the bracket. Information
and communication is the key to a successful
installation.
A / V
D I S T R I B U T I O N
5 Forbes Rd. Newmarket, NH 03857
603.659.5170 • Fax 603.659.5388
Fax-On-Demand: 603.659.5590
e-mail: tech@russound.com
Come visit us at:
2 pcs.
fig 1
fig 2
fig 3
&
C O N T R O L
S Y S T E M S
4 pcs.
Advertisement
