Download Print this page

Russound SDB 1 Instruction Manual page 4

Sdb series dual-source speaker selectors

Advertisement

6. Specifications
SDB-2.1
Power :
Volume Control:
Impedance Matching:
Wire Size:
Dimensions:
Weight:
SDB-6.1
Power :
Volume Control:
Impedance Matching:
Wire Size:
Dimensions:
Weight:
7. Warranty
The Russound SDB Series is fully guaranteed for Ten (10) years from the date of purchase against all defects in materials and workman-
ship. During this period, Russound will replace any defective parts and correct any defect in workmanship without charge for either
parts or labor. For this warranty to apply, the unit must be installed and used according to its written instructions. If service is necessary,
it must be performed by Russound. The unit must be returned to Russound at the owner's expense and with prior written permission.
Accidental damage and shipping damage are not considered defects under the terms of the warranty. Russound assumes no responsibil-
ity for defects resulting from abuse or servicing performed by an agency or person not specifically authorized in writing by Russound.
Damage to or destruction of components due to improper use voids the warranty. In these cases, the repair will be made at the owner's
expense.
Before returning a unit for repair, call Russound at (603) 659-5170 for a Return Authorization (RA) number. To return for repairs, the unit
must be shipped to Russound at the owner's expense, along with a note explaining the nature of the service required. Be sure to pack in
a corrugated container with at least 3 inches of resilient material to protect the unit from damage in transit. Write the RA number on the
shipping label and ship to: Russound, ATTN: Service, 5 Forbes Road, Newmarket, NH 03857 USA.
Russound sells product only through authorized Dealers and Distributors to ensure that customers obtain proper support and service.
Any Russound product purchased from an unauthorized dealer or other source, including retailers, mail order sellers and online sellers
will not be honored or serviced under existing Russound warranty policy. Any sale of products by an unauthorized source or other man-
ner not authorized by Russound shall void the warranty on the applicable product.
Russound is not responsible for typographical errors or omissions.
All trademarks are the property of their respective owners.
100 watts per channel RMS continuous
200 watts per channel average
300 watts per channel peak
42 dB attenuation, 12 positions
Russound Ultra-Match™ Autoformers
up to 14 gauge wire
8.5" W x 3.0" H x 6.25" D
(21.6 x 7.6 x 15.9 cm)
4 lb (1.8 kg)
150 W per channel RMS continuous
300 W per channel average
450 W per channel peak
42 dB attenuation, 12 positions
Russound Ultra-Match™ Autoformers
up to 14 gauge wire
17.0" W x 3.0" H x 6.25" D
(43.2 x 7.6 x 15.9 cm)
10 lb (4.5 kg)
5 Forbes Rd. Newmarket, NH 03857
Tel 603.659.5170 • Fax 603.659.5388
e-mail: tech@russound.com
SDB-4.1
Power :
200 W per channel RMS continuous
400 W per channel average
600 W per channel peak
Volume Control:
42 dB attenuation, 12 positions
Impedance Matching:
Russound Ultra-Match™ Autoformers
Wire Size:
up to 14 gauge wire
Dimensions:
17.0" W x 3.0" H x 6.25" D
(43.2 x 7.6 x 15.9 cm)
Weight:
9 lb (4.05 kg)
28-0078
Rev. 4
04/05/06

Advertisement

loading

This manual is also suitable for:

Sdb-2.1Sdb-4.1Sdb-6.1