TP-Link TL-WN350G User Manual page 18

WPA/WPA2: Wi-Fi Protected Access
WPA/WPA2 Passphrase: Wi-Fi Protected Access Passphrase
802.1x: Enables 802.1x security.
Pre-Shared Key (Static WEP): Enables the use of shared keys that are defined on both the
access point and the station. To define shared encryption keys, choose the Shared Key radio
button and click Configure to fill in the Define Shared Keys window (shown in Figure 3-5).
None: No security (not recommended).
Note:
If the access point to which the Wireless PCI Adapter is associated has WEP set and the client
has WEP enabled, make sure that Allow Association to Mixed Cells is checked on the Security
Tab to allow association. To complete WEP encryption configuration, you must select the 802.11
Authentication Mode as appropriate on the Advanced tab of this Profile Management dialog.
To configure the Encryption Keys under the Pre-Shared keys (Static WEP) Security mode:
3. Edit the Advanced tab
This screen below allows you to make advanced configuration for the profile.
TL-WN350G 54M Wireless PCI Adapter User Guide
Figure 3-5
13