Pioneer S-LX70C Operating Instructions Manual page 151

The Video Adjust menu
3 Select the picture quality setting you want to
adjust.
Memory1
Prog. Motion
PureCinma
YNR
BNR
MNR
Sharpness
Detail
You can adjust the following settings:
• Prog. Motion – Adjusts the motion and still picture
quality when video output is set to progressive. (Prog.
Motion is ineffective when PureCinema is On.)
• PureCinema – This setting optimizes the picture for
film material when the video output is set to
progressive. Usually set to Auto 1 but try switching to
Auto 2, On or Off if the picture appears unnatural.
• YNR – Adjusts the amount of noise reduction (NR)
applied to the Y (brightness) component.
• BNR – Adjusts the amount of noise reduction (NR)
applied to the block noise (artefacts visible in areas of
flat colour, caused by MPEG compression).
• MNR – Adjusts the amount of noise reduction (NR)
applied to the mosquito noise (artefacts visible
around the edges of an image, caused by MPEG
compression).
• Sharpness – Adjusts the sharpness of the high-
frequency (detailed) elements in the picture.
Sharpness is ineffective for HDMI output.
• Detail – Adjusts how sharp edges appear.
• White Level – Adjusts the intensity of white. White
Level is ineffective for HDMI output.
• Black Level – Adjusts the intensity of black. Black
Level is ineffective for HDMI output.
• Black Setup – Corrects the standard reference black
level. Black Setup is ineffective for HDMI output.
• Gamma Correction – Adjusts the brightness of
darker images. Gamma Correction is ineffective for
HDMI output.
• Hue – Adjusts overall balance between red and
green. Hue is ineffective for HDMI output.
• Chroma Level – Adjusts how rich the colours
appear. Chroma Level is ineffective for HDMI output.
4 Use the buttons to adjust the currently
selected picture quality setting.
5 When you have all the settings as you want
them, press HOME MENU to exit.
Motion Still
Auto1
Off Max
Max
Off
Max
Off
Fine
Soft
Soft Fine
Tip
• To see more of the picture as you adjust different
settings, press ENTER after selecting the setting you
want to adjust.
14
151
En