Table of Contents
Advertisement
6.2.3
Creating a RAID 10 set (Stripe + Mirror)
To create a RAID 10 set:
From the utility main menu, select 1. Create RAID Volume, then press
1.
<Enter>. This screen appears.
Intel(R) Matrix Storage Manager option ROM v5.6.2.1002 ESB2
Copyright(C) 2003-06 Intel Corporation. All Rights Reserved.
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive
2.
Enter a name for the RAID 10 set, then press <Enter>.
Highlight RAID Level, press the up/down arrow key to select RAID 10
3.
(RAID0+1), then press <Enter>.
Follow steps 4 to 9 of section 6.2.1 Creating a RAID 0 set (striped) to create
4.
the RAID 10 set.
6-8
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
[
DISK/VOLUME INFORMATION
and cannot contain special characters.
[↑↓]-Select
[ESC]-Exit
[
CREATE ARRAY MENU
]
Volume1
RAID10(RAID0+1)
Select Disks
128KB
0.0
GB
Create Volume
[ENTER]-Select Menu
]
Chapter 6: RAID configuration
Advertisement
Table of Contents
