Asus RS160-E2 User Manual page 102

Configuring the SCSI controller Configuring the SCSI controller Configuring the SCSI controller
Configuring the SCSI controller Configuring the SCSI controller
You need to configure the SCSI controller before creating a RAID set. After
selecting the SCSI channel to use, the utility prompts you to select from the
available options. Use the arrow keys to select C o n f i g u r e / V i e w S C S I
C o n t r o l l e r S e t t i n g s C o n t r o l l e r S e t t i n g s C o n t r o l l e r S e t t i n g s, then press <Enter>.
C o n t r o l l e r S e t t i n g s C o n t r o l l e r S e t t i n g s
Enabling the HostRAID controller Enabling the HostRAID controller
Enabling the HostRAID controller Enabling the HostRAID controller Enabling the HostRAID controller
To enable the Adaptec HostRAID controller:
1. Use the arrow keys to select the H o s t R A I D
section.
2. Press <Enter> to set the item to E n a b l e d
3. Press <Esc> to exit.
4. When the utility prompts you to
save the changes, select Y e s
then press <Enter>.
6 - 4 6 - 4 6 - 4
6 - 4 6 - 4
H o s t R A I D item in the Configuration H o s t R A I D H o s t R A I D
H o s t R A I D
E n a b l e d E n a b l e d
E n a b l e d. E n a b l e d
Y e s Y e s, Y e s
Y e s
C h a p t e r 6 : D r i v e r i n s t a l l a t i o n C h a p t e r 6 : D r i v e r i n s t a l l a t i o n C h a p t e r 6 : D r i v e r i n s t a l l a t i o n
C h a p t e r 6 : D r i v e r i n s t a l l a t i o n C h a p t e r 6 : D r i v e r i n s t a l l a t i o n
C o n f i g u r e / V i e w S C S I C o n f i g u r e / V i e w S C S I C o n f i g u r e / V i e w S C S I
C o n f i g u r e / V i e w S C S I