Table of Contents
Advertisement
3. ATX power connector (24-pin EATXPWR, 8-pin SSI 12VCON)
These connectors are for the 24-pin power plug and the 8-pin 12V
power plug from an SSI-type 350W power supply. The plugs from the
power supply are designed to fit these connectors in only one
orientation. Find the proper orientation and push down firmly until the
plugs completely fit into the connectors.
PR-DLSR
®
PR-DLSR ATX Power Connector
4. Wake-On-LAN connector (3-pin WOL_CON)
This connector supports a LAN card with a Wake-On-LAN output. The
connector powers up the system when a wake-up packet or signal is
received through the LAN card.
PR-DLSR
®
PR-DLSR Wake-On-LAN Connector
2-18
EATXPWR
24-pin Power Connector
1
8-pin
SSI12VCON
WOL_CON
Ground
PME
+5 Volt Standby
Chapter 2: Hardware information
Advertisement
Table of Contents
