changing the presser foot sole
changing the presser foot
sole
raise the needle and the
•
presser foot shaft
turn power switch to «0»
•
press the button on the shaft
•
to release the sole
supplementary spool pin
Attaching the presser foot
sole
place the presser foot sole
•
under the shaft so that the
peg sits under the opening of
the shaft
A
Setting up the sewing computer
lower the presser foot lifter
•
and the foot sole will click
into position
collapsible vertical spool pin
found on the back of the sewing computer behind the
•
handwheel
essential aid for sewing with more than one thread, i.e. double
•
needle work
raise the pin until it clicks into its vertical position
•
when using large reels, add the foam pad A for stability
•
15
please refer to the
safety instruction!