Monitoring System Usage; Setting A Latest Range Value - Dell DR4000 Administrator's Manual

FILE LOCATION: C:\Users\bruce_wylie\Desktop\Dell
Docs\~Sidewinder_Docs_DR4000\FRAME_Conversion_DR4000_AdminGuide\~DR4000_AG_F

Monitoring System Usage

To display the current state of system usage:
1 Click DashboardUsage.
The Usage page is displayed.
2 View the current system usage based on the current Latest Range or Time
Range values in effect (the default is the last 1-hour period). By default,
the CPU Load usage is always the first tab that displays when the Usage
page is selected.
3 Click any of the system usage tabs to display the current status for that tab
category (or click All to display all of the system usage tab results).
For example, click Protocols to display the current results for the NFS
Usage - Total and CIFS Usage - Total in the system.

Setting a Latest Range Value

To set a Latest Range value and display the system status results based on
these settings:
1 Click DashboardUsage.
The Usage page is displayed.
2 Click Latest Range.
3 In Display last... select a value from the drop-down list for the display
period to be shown.
By default, Hours is the display period shown. Using this example, you
would select a value between 1-24.
4 Select the Hours, Days, or Months period from the drop-down list.
5 Click Apply.
6 Click the tab that corresponds to the usage type you want to monitor using
your choice of settings (or click All to display all of the system usage tab
results based on your choice of settings).
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 / 1 0 / 1 2 - F O R P R O O F O N LY
70
Monitoring the DR4000 System