Table of Contents
Advertisement
36
4. Hardware Setup
AP2300 Hardware Reference Guide
Power Supply
Mounting
Located in the back of the chas-
sis, the power supply unit is se-
cured by 4 screws.
Removing One
Power Supply
Module
If any of the power modules fails,
the power module's LED will
turn OFF. If this happends, re-
move the power cord to the failed
power module. Remove the two
screws and slide the failed power
module out.
Removing the
Entire Power
Supply Unit
Unplug all power cords. Remove
the four screws securing the
power supply unit, and then slide
the power supply unit toward the
front of the chassis (as pointed).
Advertisement
Table of Contents
