Samsung SMT-190DN - Monitor + DVR User Manual page 9

SMT-171/SMT-190-ENG 12/8/05
USER'S MANUAL
1. Press the MENU button and then
menu.
2. Press the ENTER or
3. Press the ENTER or
to select the item to adjust.
EX) If you select the Brightness, then the picture below will
appear on the screen.
Brightness
4. Press the button to increase or decrease level.
/
5. Press the button to select the other item.
/
6. Press ENTER button to save.
Color Tone
VGA
Adjustment
Color Tone
User
Move Enter
1. Press the MENU button and then
Picture menu.
2. Press the ENTER or
3. Press the ENTER or
the Color Tone.
4. Press the ENTER button to save.
User
VGA
Adjustment
Color Tone : User
User
Move Enter
VGA
Red : 50
Green : 50
Blue : 50
Move Enter
1. Press the MENU button and then
Picture menu.
2. Press the ENTER or
to select the User.
3. Press the ENTER or
to select the adjust the menu item you need.
EX) If you select the Red, then the picture above will appear
on the screen.
9:40 AM Page 9
button to select the Picture
/
button to select the Adjustment.
button and then Press the
/
80
Picture
Cool
Normal
Warm
User
Exit
button to select the
/
button to select the Color Tone.
button and then button to select
/
Picture
√
√
√
Exit
Picture
√
√
√
Exit
button to select the
/
button and then Press the
/
button and then Press the
/
... Red
†
button
4. Press the button to increase or decrease level.
/
5. Press the button to select the other item.
/
6. Press ENTER button to save.
D. OSD MENU
Video A
Transparency : 00
OSD Timer : 10s
No Signal : On
Language : English
Move Enter
Transparency or OSD Timer
Video A
Transparency : 00
OSD Timer : 10s
No Signal : On
Language : English
Move Enter
1. Press the MENU button and then
OSD menu.
2. Press the ENTER or
select Transparency or OSD Timer.
EX) If you select OSD Timer, then the picture below will
appear on the screen.
... OSD Timer
†
3. Press the button to increase or decrease level.
/
4. Press the button to select the other item.
/
5. Press the ENTER button to save.
No Signal
Video A
Transparency
Off
ODS Timer
On
No Signal
Language
Move Enter
1. Press the MENU button and then Press the
select the OSD menu.
2. Press the ENTER or
button
to select the No Signal.
3. Press the ENTER or
button
to select the On or Off.
4. Press the ENTER button to save.
- 9 -
75
OSD
√
√
√
√
Exit
OSD
√
√
√
√
Exit
button to select the
/
button and then button to
/
20s
OSD
Exit
button to
/
button and then Press the button
/
button and then Press the button
/
E