Accessing The Keyboard Control Menu; Keyboard Control Menu Options - Bosch KBD-DIGITAL Installation Manual

IntuiKey Keyboard
3.6.1

Accessing the Keyboard Control Menu

1.
2.
3.
3.6.2

Keyboard Control Menu Options

Exit
Factory Reset
Protocol
Language Select
Bosch Security Systems, Inc.
Press PROD to view the Product Selection menu.
Press the softkey labeled Keyboard Control. The Keyboard Control softkey can always be
found at the very end of the device listings.
The Softkey Display shows the Keyboard Control main menu (see Figure 3.10). A review
of the Keyboard Control menu options follows.
Exit
Firmware
Factory
Upgrade
Reset
Protocol
RS-485
Allegiant
Language
Baud
Select
9600
Keyboard
Contrast
Adjust
Test
Key Click
LCD
On/Off
Test
Display
Joystick
Inverse
Auto Cal.
Normal
Figure 3.10 Keyboard Control Menu
Reverts to the Product Selection menu.
Resets the keyboard to the following states:
– Product Selected: NONE
– Key Click: ON
– Display Inverse: Normal (black on white)
– MUX Destination: Addr 1
– Softkey Contrast: 9
– Status Display Contrast: 6
– MUX User Level: No Access
– Language: NONE
– Allegiant Baud: 9600
This password-protected option is used to set the Allegiant
communication protocol. Default is RS-485. When using a
Terminal Mode connection, leave this parameter at its default
setting. See Appendix A for details on entering passwords.
For selection of the display language. Choose from the following
languages: English, Spanish, French, German, Dutch, Italian,
Polish, Portuguese, Turkish, Hungarian, Sweedish, Finish, and
Danish. Pressing the next or previous arrow jumps between this
menu and the additional options. Additional languages can be
downloaded from the IntuiKey section of www.boschsecurity.us.
The additional languages are: Czech, Russian, Slovak, Simplified
Chinese, Traditional Chinese, Korean, Norwegian, Greek, and
Arabic.
Additional information is shown below the language, including its
version number, the font table number that it utilizes for its
characters, and a schema number that is used for internal control
purposes.
Installation Manual
Installing the IntuiKey Keyboard | en
F.01U.115.018 | 1.92 | 2008.12
21