Date & Time Tab; Initialize Tab - Sony SNC-M3W User Manual

Date & time Tab
Current date & time
Displays the date and time set on the camera.
Note
After you have purchased the camera, be sure to check
the date and time of the camera and set them if
necessary.
PC clock
Displays the date and time set on your computer.
Date & time format
Select the format of date and time to be displayed on the
main viewer from the drop-down list.
You can select from among yyyy-mm-dd hh:mm:ss
(year-month-day hour:minute:second), mm-dd-yyyy
hh:mm:ss (month-day-year hour:minute:second), and
dd-mm-yyyy hh:mm:ss (day-month-year
hour:minute:second).
Adjust
Select to set the day and time.
Keep current setting: Select when you do not need to
set the date and time.
Synchronize with PC: Select when synchronizing the
camera's date and time with those of the computer.
Manual setting: Select when you want to set the
camera's date and time manually.
Select the lower 2-digits of year, month, date, hour,
minutes and seconds from each drop-down list.
Synchronize with NTP: Select when synchronizing the
camera's date and time with those of the time sever
called NTP server (Network Time Protocol). Set the
NTP saver name and the Interval.
NTP server name
Type the host name or IP address of the NTP server, up
to 64 characters.
22
Configuring the System — System setting menu
Interval time
Select the interval at which you want to adjust the
camera's time referring to the NTP server' time, between
1 and 24 hours. The set interval is a guide, and does not
indicate the exact time.
Note
The setting time may not accord with the exact time
according to the network environment.
Time zone
Set the time difference from Greenwich Mean Time in
the area where the camera is installed.
Select the time zone where the camera is installed from
the drop-down list.
Adjust clock for daylight saving time changes
When you select it, the clock is adjusted according to the
daylight saving time of the selected time zone.
Notes
• If the time zone selected on the Time zone menu is
different from that set on the computer, the time is
adjusted using the time zone difference and set on the
camera.
• The daylight saving time adjustment works only when
Adjust is set to Synchronize with NTP.
OK/Cancel
See "Buttons common to every setting menu" on page
19.

Initialize Tab

Reboot
Reboots the camera.
Click Reboot, and "The SNC-M3 (or SNC-M3W) will
be rebooted. Are you sure?" appears. Click OK to
reboot the camera. It takes about two minutes to start
again.