Selecting A Camera Channel (For Multi-Pack Only); Pairing Camera Channels; Night Vision; Talk Function - Motorola MBP30 User Manual

3.2

Selecting a camera channel (for multi-pack only)

The Parent unit has 4 camera channels (
which the video can be displayed and the audio heard. Each baby unit is
paired with a camera number 1, 2, 3 or 4 when it is registered to the parent
unit, and the parent unit shows the number of the selected channel at the
top right of the display. You will need additional baby units registered to the
parent unit if you wish to monitor different areas using this channel option.
To switch between the channels, press
3.3

Pairing camera channels

The enclosed baby unit has already been registered and no setup is required.
For additional units, you will need to pair them to new channels before you
can use them. There are up to 4 camera channels (
available for pairing. See section "2.4 Registration" for more details.
3.4

Night vision

The baby unit has 9 high-intensity infrared LEDs for picking up clear
images in the dark. When the built-in photo sensor detects a low level
of ambient light, the LEDs will automatically activate and the screen on
the parent unit will display in black and white.
3.5

Talk function

Press and hold
baby unit loudspeaker. The symbol
the LCD screen.
3.6

Adjusting the volume of the parent unit

When the video is playing or in standby mode, press
-
volume or to increase volume. The display will show the current
volume setting for 5 seconds.
NOTE
The parent unit also provides a visual indication of the sound level
detected at the baby unit, regardless of the volume setting.
Up to five arrows (>>>>>) are turned on across the bottom of the
display, with more arrows indicating a louder sound.
12
(
on the parent unit to talk to your baby through the
1 2
/ /
F
.
1
/
will be displayed at the top of
+
Using the Baby Monitor MBP30
3 4
/ ) from
2 3 4
/ / )
to decrease