Xf Day/Night Ip Cameras - Bosch LTC 1462/21 Reference Manual

Dinion Day/Night IP cameras
XF
Advanced Day/Night camera with mechanically switching IR filter.
15-bit DSP technology with XF-dynamic extended dynamic range.
DVD-quality up to 25/30 IPS at 4CIF.
Storage efficient tri-streaming: Dual MPEG-4/H.264 & JPEG
simultaneously.
Power over Ethernet (IEEE 802.3af compliant).
Hybrid IP camera with analog and Ethernet outputs.
Why select Dinion
• Innovative technology — In Day/Night Mode, the NWC-0495 provides
enhanced night viewing by increasing the IR sensitivity. The IR filter can
switch automatically from color to monochrome by either sensing the
illumination level or via the alarm input. The highly accurate 15-bit digital
signal is automatically processed to reveal every detail of the image
in both the high-light and low-light areas of the scene simultaneously.
The built-in video motion detector allows you to select up to four fully
programmable areas with individual thresholds.
• MPEG4 video encoding — MPEG-4 encoder creates high-quality streaming
video at low bit rates. Each Dinion IP camera can deliver up to 25 and
30 images per second (PAL and NTSC) at true 4CIF video resolution.
• Tri-streaming Video — Dinion IP cameras can generate two separate
MPEG-4 video streams and one JPEG stream simultaneously.
This advanced tri-streaming capability, not typically found in other
IP CCTV systems, enables the user to tune live viewing and recording
requirements to meet specific site and enterprise needs.
• Ease of installation — Three power options, PoE, 24 VAC and 12 VDC,
are available on the NWC-0495. Unlike other IP cameras, no network
connection, PC configuration utilities or other tools are required to set
up Dinion IP. The Lens Wizard automatically detects the lens type and
helps focus the lens to ensure proper focus is maintained throughout
the 24-hour cycle. No special tools or filters are required.
30
Day/Night IP cameras?
XF