Related Manuals for Bosch DVR-16L-100A
Summary of Contents for Bosch DVR-16L-100A
- Page 1 Divar MR Digital Video Recorder Type numbers DVR-8K, DVR-16K, DVR-8L, DVR-16L Operation Manual_en...
-
Page 3: Table Of Contents
3.19 Camera settings 3.20 Schedule settings 3.21 Display settings 3.22 Event settings 3.23 Network settings 3.24 System settings Recording Instant Recording Search and playback Playback Search Functions available during playback Bosch Security Systems User Manual F01U | 2.0 | 2008.12... - Page 4 Main Screen of Alarm Notifi er program Archive Player program Web Viewer program REFERENCE Troubleshooting Recommended devices Time zones Factory default confi guration settings Recording Time Table (500GB HDD) Recording Time Table (160GB HDD) Specifi cations F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
-
Page 5: Safety
– an object has fallen into the unit; – unit has been dropped or the unit cabinet is damaged; – unit exhibits a distinct change in performance; Bosch Security Systems User Manual F01U | 2.0 | 2008.12... -
Page 6: Safety Precautions
Attachments, changes or modifications - Only use attachments/accessories specified by the manufacturer. Any change or modification of the equipment, not expressly approved by Bosch, could void the warrantee or, in the case of an authorization agreement, authority to operate the equipment. - Page 7 Please dispose of these units at an environmentally compatible recycling facility, per European Directive 2002/96/EC. Environmental statement - Bosch has a strong commitment towards the environment. This unit has been designed to respect the environment as much as possible.
- Page 8 SELV circuits. Video loss - Video loss is inherent to digital video recording; therefore, Bosch Security Systems can- not be held liable for any damage that results from missing video information. To minimize the risk of lost digital information, Bosch Security Systems recommends multiple, redundant recording sys- tems, and a procedure to back up all analog and digital information.
- Page 9 More information For additional information, please contact the Bosch Security Systems location nearest you or visit our web site at www.boschsecurity.com Bosch Security Systems User Manual...
- Page 10 | Safety Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
-
Page 11: Introduction
Automatically adjust a bandwidth according to network speed status of unit. • Remote alarm notifi cation via PC software or e-mail. • Time and date sync from NTP server. • Daylight saving mode. Bosch Security Systems User Manual F01U | 2.0 | 2008.12... -
Page 12: Accessories
AAA Type Batteries for Remote Rack Mount Bracket Control Mouse Divar MR PC software Screws for rack mount bracket Power plugs Connection board for Alarm I/O and Biphase Figure 2.1 Accessories F01U | 2.0 | 2008.12 User Manual Bosch Security Systems... -
Page 13: Front Panel
: Displays the search menu. : Starts or stops instant recording of the selected camera (yellow border). : Cancels alarm activation and returns the system to the condition before the alarm was activated. Bosch Security Systems User Manual F01U | 2.0 | 2008.12... - Page 14 : Lights when a network cable is connected. USB Port Connect an external USB device for back up or playback. Remote Sensor Point the remote control here. Activate if you use the Sub-function of the channel button. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
-
Page 15: Back Panel
Connect up to 8 alarm output relays via the supplied 25-pin D-type connector board. RS-422/485 Terminals: Connect RS422/485 compatible cameras. KBD IN: Connect a Bosch CCTV keyboard unit to the KBD IN socket. COM1: Use to connect to a host device equipped with RS-232C connector (such as a personal computer). -
Page 16: Remote Control
ESC: Use to return to previous level or to exit menu system without saving. • MENU: Displays the setup menu. Arrow Buttons (b B v V): Selects or moves between the menu options. • F01U | 2.0 | 2008.12 User Manual Bosch Security Systems... - Page 17 DVRs. Press the ID button, then press the number button within 2 seconds to select the system ID of the DVR. If you set the system ID to “0”, you can control multiple DVR at the same time. Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
- Page 18 | Introduction Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
-
Page 19: Connections And Settings
Default the main monitor (MON A) will start up in VGA mode. See section 3.12 for selection of the main monitor type. Basic connection overview SHIELD CTRL 1 SHIELD CTRL 2 SHIELD CTRL 3 SHIELD CTRL 4 SHIELD CTRL 5 SHIELD Figure 3.1 Basic connection overview Bosch Security Systems User Manual F01U | 2.0 | 2008.12... -
Page 20: Camera Connections
Connect up to 16 (alarm) inputs or connect up to 8 alarm output relays via the supplied 25-pin D-type connector board. Connect PTZ cameras or DVRs. Connect a Bosch CCTV keyboard unit to the KBD IN socket. Connect audio (line input). Connect to your network via the Ethernet port or use the RS232 connector to connect directly to a PC serial port (for service purposes). -
Page 21: Cctv Keyboard Connections
Connect the USB cable of the USB backup device to the USB port on the rear panel of the unit. (Example: HDD or other external storage). 3.7.3 Mouse Connect the USB mouse for function control of the unit. Bosch Security Systems User Manual F01U | 2.0 | 2008.12... -
Page 22: Connecting A Rs-422/485 Device
Figure 3.2 RS-422/485 connections RS-422/485 Terminal Description TX- (DATA -) Data Transmission TX+ (DATA +) Data Transmission RX- (DATA -) Data Reception RX+ (DATA +) Data Reception Shield Table 3.1 RS-422-485 connections F01U | 2.0 | 2008.12 User Manual Bosch Security Systems... -
Page 23: Connecting The Biphase Port
Connections and settings | en Connecting the BIPHASE port The Biphase port is used for connecting cameras that use Bosch Biphase communications to control camera positioning. Five Biphase outputs are provided for dome camera and pan, tilt and zoom control. The screw terminal connection board supplied with the unit simplifies all Biphase connections to the unit. -
Page 24: Connecting The Alarm I/O Port
Alarm input 3 Alarm_in_4 Alarm input 4 Alarm_in_5 Alarm input 5 Alarm_in_6 Alarm input 6 Alarm_in_7 Alarm input 7 Alarm_in_8 Alarm input 8 Alarm_in_9 Alarm input 9 Alarm_in_10 Alarm input 10 F01U | 2.0 | 2008.12 User Manual Bosch Security Systems... -
Page 25: System Operation
System operation Default monitor setting is VGA. Turn on the unit. System booting will commence. The BOSCH logo image will be displayed on the main monitor during the system booting. When booting is complete, the login window will be displayed. -
Page 26: Selecting The Main Monitor Type
Press and hold the B ( ) button on the front panel until the beep sounds to display the main screen. The DVR will restart and the CCTV monitor is then set as main monitor. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems... -
Page 27: General Explanation Of The Live Screen On The Main Monitor
If you change the monitor type, the system will be rebooted automatically. 3.13 General explanation of the live screen on the main monitor Main monitor screen Figure 3.8 Main monitor screen Bosch Security Systems User Manual F01U | 2.0 | 2008.12... - Page 28 Live Screen: Displays the current surveillance live screen. Displays the current date and time. Note: Click the right button on the mouse to display / remove the system control bar displayed on-screen. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
-
Page 29: Selecting Live Screen Mode
Sequence: Views the all channels in sequence. Select [OK (A)] and press ENTER to confi rm your selection. Note: To display the screen you desire to watch in full screen mode, double click the desired channel. Bosch Security Systems User Manual F01U | 2.0 | 2008.12... -
Page 30: Ptz Camera Control
Select the PTZ camera channel on monitor A you want to control. Press PTZ or click the PTZ icon in the system control bar. PTZ virtual remote control is displayed on monitor A. Use each item to control the PTZ camera. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems... - Page 31 Input the preset number. Delete a memorized preset position. Start a preset tour. Sends the Aux OFF command. (Used only for BOSCH Auto Dome camera). Display the setup menu of the PTZ camera. (Except BOSCH PTZ camera). Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
-
Page 32: Preset Settings
Digital Video Recorder Register preset positions. Move the camera to the preset position. Sends the Aux ON command. (Used only for BOSCH Auto Dome camera). Table 3.5 The PTZ virtual remote control button function table 3.15.1 Preset settings Preset position is the function to program camera monitoring positions (preset positions) associated with position numbers. - Page 33 You cannot control the other functions when the PTZ virtual remote con- trol is displayed. • If you use the BOSCH PTZ camera that use the Bosch protocol, the SETUP icon is not displayed on the PTZ virtual remote control. 3.15.7 To send the Aux On/Off commnd Click the [ON] or [OFF] icon.
-
Page 34: Viewing System Information
Press LOG or click the LOG icon in the system control bar. The system log list window is displayed on the main monitor. Figure 3.13 System log window Use b / B to see the previous or next log list. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems... - Page 35 Backup Started HDD Damaged (HDD1) Backup Finished HDD Damaged (HDD2) Backup Failed HDD Damaged (HDD3) Export Started HDD Damaged (HDD4) Export Finished System Fan Failure Table 3.6 System log list Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
-
Page 36: Confi Guration Menu
Displays the selected main menu title. Displays the main menu icons. Displays the submenu options. Displays the help menu. Displays the selected submenu title. Displays the detail options for selected submenu. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems... - Page 37 To use other functions of number buttons on the front panel as shown below: Press ALT. The button indicator turns green. Select the function button you want. All the operation explanations are based on using the remote control. Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
-
Page 38: Camera Settings
- ESC: Exits the virtual keyboard menu. • Covert: You can set the camera conditions to prevent operation by other users. • Audio: You can hear from the selected input audio channel. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems... -
Page 39: Video Adjustment
Brightness: Adjust the brightness value from 00 to 100 for the selected channel. • Contrast: Adjust the contrast value from 00 to 100 for the selected channel. • Color: Adjust the color value from 00 to 100 for the selected channel. Bosch Security Systems User Manual F01U | 2.0 | 2008.12... - Page 40 You can see the test screen from the preview windows on the right side of the PTZ test option. - b/B: Test the pan direction. - v/V: Test the tilt direction. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
-
Page 41: Continuous Recording
1, 3, 5, 7.5, 15 704*480 1, 3, 5, 7.5 352*288 1, 3, 5, 6, 12.5, 20, 25 704*288 1, 3, 5, 6, 12.5 704*576 1, 3, 5, 6 Table 3.7 Frame rate table Bosch Security Systems User Manual F01U | 2.0 | 2008.12... -
Page 42: Instant Recording
1, 3, 5, 7.5, 15 704*480 1, 3, 5, 7.5 352*288 1, 3, 5, 6, 12.5, 20, 25 704*288 1, 3, 5, 6, 12.5 704*576 1, 3, 5, 6 Table 3.8 Frame rate table F01U | 2.0 | 2008.12 User Manual Bosch Security Systems... - Page 43 Pre-event times given are only a rough guide. Actual times are dependent upon resolution, quality, and frame rate settings, as well as the number of channels selected for pre-event recording. Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
-
Page 44: Motion Recording
Pre-event times given are only a rough guide. Actual times are dependent upon resolution, quality, and frame rate settings, as well as the number of channels selected for pre-event recording. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems... -
Page 45: Schedule Settings
The recording schedule screen displays one day of the week showing the schedule of all channels over a 24-hour period. For each 1-hour cell block the recording method can be specified. The recording method for each block is shown in color for easy viewing. Bosch Security Systems User Manual F01U | 2.0 | 2008.12... - Page 46 Red (Input event recording): Recording starts automatically when the input is activated within a designated time. Yellow (Motion event recording): Recording starts automatically when motion is detected within a designated time. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
- Page 47 Press MENU to confi rm your settings. The confi rmation window is displayed. Select OK and press ENTER to save the new settings. • Press ESC to exit the specifi c date selection menu. Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
- Page 48 Select a cell block. Figure 3.28 Exception days setup menu Press the SET button or click the icon on the exception days setting menu. The specifi c date selection menu appears. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
- Page 49 Use v / V to select the [OK] icon then press ENTER to fi x the date of the special day and return to the special day menu screen. Select the schedule time and set the recording method for each channel. Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
- Page 50 You can copy the schedule data of the channel to the other channel(s) within the selected day of the week. Select the day of the week and press ENTER. Select channel that you want to copy. Press COPY then the channel selection menu appears. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
- Page 51 Press MARK then the select date(s) menu appears. Figure 3.33 Day copy menu Use b/B to select the target date(s). Use v/V to select [OK] then press ENTER to confirm your selection. Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
-
Page 52: Display Settings
On: Displays the title of the camera. Off: Displays the live picture without the title of the camera. • Camera status On: The current camera recording status is displayed. Off: Remove the current camera recording status. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems... - Page 53 Seq. dwell time: You can set the camera sequence time to 2 sec, 5 sec, 10 sec, 20 sec, 30 sec, 40 sec, 50 sec, 60 sec, 70 sec, 80 sec or 90 sec. 3.21.3 Monitor B Figure 3.36 Monitor B setup menu Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
-
Page 54: Event Settings
Preset: Select the preset number. When the input is activated, the camera moves to the selected preset position and the picture of the camera in that position appears on the monitor. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems... - Page 55 In situations where illumination is low and the outline of object is not clear enough to see, regardless of sensitivity, Motion Event might not activate. You must check Motion Event before setting. Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
- Page 56 Alarm ackn. Manual: Use the ACK button on the remote control or button on the front panel to stop alarm. Post-event time: The alarm is stopped after the programmed post-event time. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
-
Page 57: Network Settings
Bandwidth limit: Enter the Bandwidth to adjust the data traffi c. Note: When you change the Remote client port or HTTP port number, all connections with the Control Center programs or web browser will be disconnected. Bosch Security Systems User Manual F01U | 2.0 | 2008.12... - Page 58 In case the DVR is used in the network system with a firewall, open the TCP 8245 port so that DDNS data can get into firewall. For more detail on firewall setup, ask your network administrator and/or network service provider. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
- Page 59 On: Sends an e-mail when a video signal from the camera has stopped because of a cable disconnection or malfunction of a camera. Off: Not used. • Power on/off: On: Sends an e-mail when power is on or off. Off: Not used. Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
- Page 60 SMTP server. Specify the server host name or IP address in such a case. For more detail on SMTP setup, ask your network administrator and/or mail service provider. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
- Page 61 fl exibility or security. If desired, change the port number (1025 ~ 65535). You can set up to 9 IP address/port numbers. Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
-
Page 62: System Settings
Daylight saving: Set to On to use the daylight saving function. • Daylight saving start: Select the Daylight saving start time. • Daylight saving end: Select the Daylight saving end time. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems... - Page 63 Sync. interval: You can set synchronized intervals with the NTP time server to 1 day, 1 hour, 1 month and 1 week. • NTP test: Select [NTP test] to test the NTP server. Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
- Page 64 Off: Turns off the system beeper. Note: The beeper is a low sound on this unit. If you want to make a loud sound, connect an external alarming device to the output connecter (ext. siren). F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
- Page 65 (minimum length 4, maximum length 8). Note: Remember the password. If you forget the password please contact an authorized service center or the dealer you purchased the system. Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
- Page 66 Select OK to begin the update process or click Cancel to stop and exit. After the update process is completed, the system displays the Restart the system dialog box. Click OK to restart the DVR. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
- Page 67 Configuration data import is available when the configuration data of a DVR is the same kind as this unit’s data. • If you use a USB memory stick for configuration export, you must dis- connect the other external USB devices. Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
-
Page 68: Hard Disk
If you change the value of event partition, the current recorded data of HDD is deleted and the partition is reset. The partitions will be formatted automatically and the system will be restarted. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems... - Page 69 Time range end: Enter the end day of the week or time. • Estimate size: Displays the size of backup data and the free space of external devices. • Start backup: To start backup. • Erase media: To erase the media. Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
- Page 70 The disc burning is carried out by a single session closed format. • If you use the CD/DVD writer device for backup,the backup status will be displayed as shown below. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
- Page 71 When you set the schedule backup, the backup data size is estimated from the recording settings of the Setup menu. If the actual recorded data size is larger than the estimated recording data size, the schedule backup may not be activated. Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
- Page 72 DVR unit. • Auto user logout: Logout is automatical at fi xed intervals. You can set auto logout time to 5 min, 10 min, 30 min, 60 min or Off. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
-
Page 73: Recording
If you stop instant recording, the recording mode will be changed into the scheduled recording mode and the red dot disappears. Figure 4.2 Selected channel screen of the main monitor, showing the red dot. Bosch Security Systems User Manual F01U | 2.0 | 2008.12... - Page 74 Once the event partition is set to 0%, you can not record the alarm and motion recording. • Priority of record. Instant record > Input record > Motion record > Continuous record. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
-
Page 75: Search And Playback
Select source device This item is used to set the playback or search device. Press SEARCH button, the search menu is displayed. Press ESC to move to the Title menu tab. Bosch Security Systems User Manual F01U | 2.0 | 2008.12... - Page 76 Do not remove the external USB device while the backup search is in progress from the USB device. It may cause a malfunction. 5.2.2 Date/time search Use to search recorded pictures by specifying date, hour and minute. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
- Page 77 The picture(s) is (are) displayed in the main monitor. Figure 5.5 Playback showing system control bar Press STOP (x) to stop playback and return to the search menu. Press SEARCH or ESC to exit the menu. Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
-
Page 78: Event Search
Select the channel for event search using ENTER. Use v/V/b/B to select the [Event type] then press ENTER. Select the [Search] icon then press ENTER. The event list menu appears. Figure 5.7 Event list F01U | 2.0 | 2008.12 User Manual Bosch Security Systems... -
Page 79: Smart Search
Click the one point and drag & drop the end point, to the left, to unselect the motion using the mouse. The active areas are indicated in red. Press ESC to exit the mask setting. Select [Search] then press ENTER. The motion detect list menu is displayed. Bosch Security Systems User Manual F01U | 2.0 | 2008.12... - Page 80 The picture is displayed in the main monitor. Press STOP (x) to stop playback and return to the bookmark list menu. Press ESC to exit the bookmark search menu. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
-
Page 81: Functions Available During Playback
You can play back the backup or export data in normal speed only. • If you use the reverse frame skip function, a frame may be skipped. • Multi channel play works only in the date/time search function. Bosch Security Systems User Manual F01U | 2.0 | 2008.12... -
Page 82: Export
Press COPY or Click icon to start exporting. The exported data will be authorized by the unit before saving and it can only be played back with the Archive player. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems... - Page 83 Destination on which media the operator saved the export (USB or DVD/CD or IP [via network]) Exported channel number(s) User ID that is logged on the system when an export was made. Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
- Page 84 | Search and playback Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
-
Page 85: Control Center
You should register a site name to control DVR by the Control Center. Double-Click the [Divar MR Control Center] icon to start the Control Center. The menu is displayed. Select [Tools] > [Connection Information]. Bosch Security Systems User Manual F01U | 2.0 | 2008.12... - Page 86 Port: Enter the Port number of the DVR. If it isn’t entered, the port number is set by default. Select [OK]. Figure 6.3 Connection list window Select [OK] to confi rm the settings. The registered site name is displayed. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
- Page 87 Normal Normal Case 2 Advanced Advanced Normal Normal Normal Case 3 Normal Normal Normal Normal Normal Case 4 Admin Normal Normal Normal Normal Case 5 Advanced Normal Normal Normal Normal Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
-
Page 88: Main Screen Of Dvr Control Center Program
Camera View: You can see the surveillance camera’s images in the window(s) and the camera information. Pan/Tilt/Zoom: You can control the PTZ cameras. Log View: Displays system log list. • Search Mode F01U | 2.0 | 2008.12 User Manual Bosch Security Systems... - Page 89 View all the channels in sequence. You cannot use sequence mode with the 16 multiscreen view. Information Display Window Displays current date and time, user information, and the remaining HDD status of the selected site name. Figure 6.6 Information Display Window Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
-
Page 90: Live Mode
Configuration of camera view is set the first time only. This configura- tion setup is memorized for the next time and displayed as it is. • No audio available in live mode only in playback. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems... - Page 91 You can not use the playback function when you log in with the Normal User ID. 6.5.3 Using the Pan/Tilt/Zoom function You can control the PTZ cameras via the network. Figure 6.10 The Pan/Tilt/Zoom window Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
- Page 92 Move the camera to the point you wish by using the v/V/b/B. Click the [SET] icon. Select preset the number you wish to register. Click the icon. The position and its numbers are memorized. Repeat steps 1-4 to add additional positions. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
- Page 93 Click the [SETUP] icon. SETUP MENU appears in the windows. Use the arrow and icons to set the options. Note: Refer to the manuals of the PTZ camera for more details. Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
- Page 94 Click the date icon and select the day for the log search. (The selectable days are displayed in blue text color.) Figure 6.12 The day select window Click the search icon. The system log is displayed in the list. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
-
Page 95: Search Mode
Figure 6.14 The Date/Time search window Select the date/time search tab. Click the date icon and select the day (the selectable days are displayed in blue color). Select the channel window you want to view. Bosch Security Systems User Manual F01U | 2.0 | 2008.12... - Page 96 Click the date icon and select the day. (The selectable days are displayed in blue color.) Select the camera channel for event search. Select the event type. Click the search icon. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
- Page 97 Play the searched data using the playback control buttons. 6.6.4 Using the Smart search function Picture recorded via motion detection can be searched by specifying the motion detection conditions. Figure 6.20 The Smart search window Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
- Page 98 Select the all area. Figure 6.22 The sensitivity level setting window Selected area within red box. Figure 6.23 Selected motion area Click the search icon. The smart search data is displayed. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
-
Page 99: Remote Setup Mode
Remote Setup mode You can set the DVR of a selected site name in the remote setup tab via the network. 6.7.1 Camera / Display setup Figure 6.25 The Camera/Display setup window Bosch Security Systems User Manual F01U | 2.0 | 2008.12... - Page 100 If you want to display the grid, mark up the [Show grid] option. • If you want to select the entire area, click the [Set all] button or click the [Clear all] button to cancel the selected area. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
- Page 101 The instant recording setting window appears. Figure 6.28 The Instant recording setting window Set each option using the mouse (see "3.19.5 Instant recording"). Click the [OK] button to confi rm the settings. Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
- Page 102 The instant recording setting window appears. Figure 6.30 The Motion recording setting window Set each option using the mouse (see "3.19.7 Motion recording"). Click the [OK] button to confi rm the settings. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
-
Page 103: Schedule Setup
When the input is activated or motion has been detected, change the continuous recording mode to motion event recording mode and recording starts automatically. Select the channel to set the schedule. Bosch Security Systems User Manual F01U | 2.0 | 2008.12... - Page 104 Click the start time cell block of a channel and drag & drop across the channels to select the time period block for multi channel setting at the same time. The color of the cell block will change. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
-
Page 105: Event Setup
Setting [Alarm ackn.] options. • Alarm ackn.: Set the “Manual” or “Post-event time” option to off. Bosch Security Systems User Manual F01U | 2.0 | 2008.12... -
Page 106: Network Setup
IP address in such cases. For more detail on SMTP setup, ask your network administrator and/or mail service provider. Notification Set the notifi cation options. • Alarm on: Sends an e-mail when an input has been activated. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems... -
Page 107: System Setup
(1025 ~ 65535). You can set up to 9 IP address and port numbers. 6.7.5 System setup Figure 6.37 The System setup window Date/Time settings Set the date/time options. Bosch Security Systems User Manual F01U | 2.0 | 2008.12... - Page 108 Update server: Enter the IP address of the update server. Note: If you can not update from the update server, check the TCP/IP options and the IP address of the update server. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
-
Page 109: Remote Export Settings
Click the “Delete” button. Remote Export Settings You can copy the recorded images and audio data from the DVR unit to the PC. This function is permitted for Administrator and Advanced user. Bosch Security Systems User Manual F01U | 2.0 | 2008.12... - Page 110 Store in: Displays the current exported data save folder. You can select (or make) the folder on the computer to save the exported data. The initial save folder is "C:\Program Files\Bosch Security Systems\Divar MR\Exports". If you want to change the exported data save folder, click icon and select the new folder.
-
Page 111: Additional Programs
Box] option to display the [Divar MR Alarm Notifi er-Received Messages] window. You can check all the subjects of received messages. Click the button to close the [Divar MR Alarm Notifi er-Received Messages] window. Bosch Security Systems User Manual F01U | 2.0 | 2008.12... -
Page 112: Main Screen Of Alarm Notifi Er Program
Displays the search window. Refreshes the received message on the list. Detailed view of the received message. Deletes the selected message from the list. Closes the [Divar MR Alarm Notifi er-Received Messages] window. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems... - Page 113 Event search: Search by selected type of event for the message. • Date search: Search by selected date. Click the Search button. The search message is displayed on the [Divar MR Alarm Notifi er-Received Messages] window. Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
-
Page 114: Archive Player Program
Main screen of Archive Player Figure 7.7 The Archive Player window • Program Menu. File(F) > Open: Open the archived fi le. > Print: Print image in window of Archive Player. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems... - Page 115 Select the root directory of the USB device and select the desired fi le. An example of playable fi le format is “Channel name_date_time.exp”. Click the [Open] button. The selected data is played back automatically. Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
- Page 116 | Additional programs Digital Video Recorder Figure 7.9 The Archive Player window Click the button to stop playback. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
-
Page 117: Web Viewer Program
You must click [Install] on the Security Warning window to install the program for using the Web Viewer. If you click [Don’t Install], the Web Viewer program is not available. Bosch Security Systems User Manual F01U | 2.0 | 2008.12... - Page 118 To return to the previous screen, double click again. • Right mouse button: If you want to exit full screen mode, right click the mouse to return to the normal screen. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
- Page 119 Figure 7.12 The PTZ virtual remote control window • Use virtual remote control buttons to control the PTZ camera. For more details, refer to “6.5.3 Using the Pan/Tilt/Zoom function”. Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
- Page 120 | Additional programs Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
-
Page 121: Reference
Check the HDD detection status in the system information window. If the HDD detection status is abnormal, check the HDD formatting. Check the user type. The search function is not available for a normal user. Bosch Security Systems User Manual F01U | 2.0 | 2008.12... - Page 122 Check that the signal cable of the PTZ camera is properly connected. Check that the selected channel to control the PTZ camera. Check the user type. The PTZ camera control is not available for a normal user. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
- Page 123 You can reboot the DVR as follows: • Turn off the DVR and turn it on again after a few seconds. When the recorder does not work normally after rebooting, contact the service center. Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
-
Page 124: Recommended Devices
Export CD/DVD USB memory USB HDD Note: If you use a USB memory stick or USB HDD for configuration import/ export, you must disconnect the other external USB devices. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems... - Page 125 Protocol Name Maker Zoom Focus Iris Preset Tour Setup Tilt BOSCH BOSCH PELCO D PELCO PELCO P PELCO GANZ_DSCP GANZ_P360V1 LG_MULTIX LG_SD168 KALATEL_ KALATEL CYBERDOM PANASONIC_ PANASONIC CS850 SAMSUNG_SCC SAMSUNG Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
-
Page 126: Time Zones
Adlaide, Darwin +09:30 Brisbane, Guam, Port Moresby +10:00 Canberra, Melbourne, Sydney +10:00 Hobart, Vladivostok +10:00 Magadan, Solomon Islands, New Caledonia +11:00 +12:00 Auckland, Wellington +12:00 Fiji Islands, Kamchatka, Marshall Islands +12:00 F01U | 2.0 | 2008.12 User Manual Bosch Security Systems... -
Page 127: Factory Default Confi Guration Settings
30 IPS (NTSC), 25 IPS (PAL) Pre-event Post-event 10sec Video format Video format PAL to EMEA/APR, NTSC to US Continuous Continuous Continuous Continuous Schedule Continuous Continuous Continuous Exception days Continuous Bosch Security Systems User Manual F01U | 2.0 | 2008.12... - Page 128 NULL SMTP port no. User name NULL Mail Password NULL Mail address 1 NULL Mail address 2 NULL Mail address 3 NULL Notification Emergency IP address NULL Port no. 9002 F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
- Page 129 Event partition Auto delete Format Partition selection Schedule Device Backup Schedule start Time range date Time range start Time range end IR remote controller System DVR ID Auto user logout Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
-
Page 130: Recording Time Table (500Gb Hdd)
147/118 74/59 20/20 180/144 90/72 175/140 87/70 15/12.5 257/205 128/103 246/196 123/98 Best 7.5/6 376/301 188/150 352/282 176/141 471/377 236/188 435/348 217/174 535/428 267/214 489/391 244/195 820/656 410/328 716/572 358/286 F01U | 2.0 | 2008.12 User Manual Bosch Security Systems... - Page 131 428/342 214/171 704x480/ 704x576 507/405 253/203 465/372 233/186 786/629 393/314 690/552 345/276 7.5/7.5 280/224 140/112 267/214 133/107 302/242 151/121 287/229 143/115 Normal 335/268 167/134 316/253 158/126 499/399 249/199 458/367 229/183 Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
-
Page 132: Recording Time Table (160Gb Hdd)
97/78 49/39 20/20 110/88 55/44 103/83 52/41 15/12.5 176/141 88/70 160/128 80/64 Normal 7.5/6 229/183 115/92 203/163 102/81 261/209 130/104 228/182 114/91 280/224 140/112 243/194 121/97 448/359 224/179 359/287 180/144 F01U | 2.0 | 2008.12 User Manual Bosch Security Systems... - Page 133 95/76 172/137 86/69 295/236 148/118 254/203 127/101 15/15 67/53 33/27 64/51 32/26 7.5/7.5 101/80 50/40 95/76 48/38 Best 126/101 63/51 118/95 59/47 138/111 69/55 129/103 64/51 238/191 119/95 210/168 105/84 Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
- Page 134 31/24 Best 70/56 35/28 68/54 34/27 102/82 51/41 97/77 48/39 Note: This recording time table is for reference only. The recording time can be different depending on your surveillance environment. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
-
Page 135: Specifi Cations
Serial Interface RS-232C (D-SUB9) Biphase 1 connector (5 outputs) Network Connection Ethernet 10/100BaseT (RJ-45) Network Transmittion Network Up to120 IPS @ 352x240 Speed Bandwidth Control Password Protection Security Image Authentication Bosch Security Systems User Manual F01U | 2.0 | 2008.12... - Page 136 Bi-phase Overvoltage protection ±40V Max. cable length 1.5 Km (0.9 miles) Keyboard Output Conform RS485 max. signal voltage ±12V DVD writer DVD+R / DVD+RW, DVD-R / DVD-RW, CD-R / CD-RW F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
- Page 137 Digital Video Recorder Reference | en Bosch Security Systems User Manual F01U | 2.0 | 2008.12...
- Page 138 | Reference Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Systems...
-
Page 140: F01U | 2.0 | 2008.12
Bosch Security Systems www.boschsecurity.com © Bosch Security Systems, 2008 F01U | 2.0 | 2008.12 P/N: MFL????????