Encore ENVCWI-PTG1 - SOFTWARE GUIDE V1.1 Software User's Manual page 14

In the pop-up Add New Camera dialog window, you can:
Select the Search tab if you are not sure of the camera's
IP address. Click Search camera to search the available
camera within the network. Once the camera is found and
is shown in the list, select it and click Add Camera.
Select the Input tab to add a camera by entering its IP
address directly. Enter the camera's IP address (default:
192.168.0.30) and Port (default: 80), and then click Add
Camera.
- 13 -