Accessing The Camera; Using Ipfinder - Encore ENVCWI-PTG1 Quick Installation Manual

3

Accessing the Camera

Using IPFinder

1. Insert the Installation CD-ROM into your computer's CD-ROM
drive to initiate the Auto-Run program.
2. Click the IPFinder item to launch the utility. The control panel
will appear as below.
Click About to get the Version information of IPFinder.
Click Link to connect the selected camera.
Click Change IP to modify the IP address of the selected camera.
Click Search to find the IP address of the connected camera(s).
Click Exit to close the utility.
3. Once you get the IP address of the camera, launch the Web
browser through Link button or use the UltraView software to
access your camera.
TIP The Installation CD-ROM provides a setup program that
allows you to install IPFinder on your computer. To install
Display the connected
camera(s).
Double click to link the
Camera.
- 5 -