Using The Presenter - Encore ENUWP User Manual

Wireless Presenter with Laser Pointer User's Manual

3. Using the Presenter

Step 1: Open the battery cover on the back and insert the
battery.
Notes on battery
Do not insert battery into the Wireless Presenter in the wrong direction.
Do not leave dead or exhausted battery in the Wireless Presenter.
If you do not use the Wireless Presenter for a long period of time, remove the
battery to avoid possible damage from battery corrosion.
If the Wireless Presenter does not function correctly or if the operating range
becomes reduced, try to replace the battery with new one.
Step 2: Take out the USB receiver attached on the top and
plug it into an available USB port.
Plug the USB Receiver into your computer's USB port. You may also use the spare USB
port on your keyboard or a USB port on a hub connected to your computer.
You do not need to turn off your computer before connecting or disconnecting a USB
device.
The operation system identifies the receiver, prompts" USB Human Interface Device" and
begins installation automatically. Please follow the instruction on the screen to complete the
installation procedure.
4