Erasing Images - Sanyo VPC-S1213 Instruction Manual

Erasing Images

Erasing a single image / Erasing all images
The quick delete function enables you to delete
the last captured image during capture.
1. Press the 7 button.
The last image appears on the screen.
2. Select the image you want to erase with the
buttons.
3. Press the MENU button.
4. Select [Delete] with the
press the SET button.
5. Select [Single] or [All] with the
and press the SET button.
[Single]: Erases the selected image or the
last image.
[All]: Erases all of the images except for the
protected images.
6. Select [Execute] with the
press the SET button.
To not erase, select [Cancel], and press the
SET button.
7. To exit from the menu, press the MENU button.
Deleting an image will not affect sequential image numbering. For example, if you delete image
number 240, the next captured image will be numbered 241 even though 240 no longer exists. In
other words, an image-number is retired when an image is deleted and will not be reused or
reassigned to another subsequently captured image.
EN-30
/
/ buttons, and
/ buttons,
/ buttons, and
MENU SET