Bosch DHD3614UC Installation Instructions Manual page 4

Parts Needed
Blower (Remote or Integral)
Tape Measure
Phillips Head Screwdriver
Duct Tape
Ductwork (configuration varies
depending on location; See pages 7-12
for further information)
Additional Sheetmetal screws
(as necessary for ductwork installation)
Transition(s) (style varies depending on
ductwork)
Transition box for remote blower
installations is available as an accessory.
Saw (or equivalent for cutting
countertop)
#8 x 1 1/4" Wood Screws (4)
4
Parts Supplied
Downdraft assembly (1)
#8 Sheetmetal Screws (8)
Blower Cord Strain Relief (1)
Hardware for brackets on vent (2)
Remote Blower Pigtail