Setting Panels For Which Status Will Not Be Obtained; Controlling Target Pc Power - Sharp PN-V601 Operation Manual

●Setting panels for which status will not be obtained
It is possible to set panels for which status will not be acquired so that they will not be displayed in the panel list.
1. From the [Option] menu click [Panel setting without status acquisition].
2. Select panels from the "Panel list with getting status".
3. Click [Add].
The selected panels will move to the "Panel list without
getting status".
4. Click [OK].
To reset a panel so that its status will be acquired,
select it from the "Panel list without getting status",
and click [Remove].
●Controlling target PC power
The target PC can be turned on and off, and restarted.
1. Select a group from the group tree, and then select a
panel from the panel list.
2. To turn the target PC on, from the [Panel] menu, click [Power control of controller PC] and then
[Power on], or alternatively, click
To restart the target PC, from the [Panel] menu, click [Power control of controller PC] and then
[Reboot], or alternatively, click
To turn the target PC off, from the [Panel] menu, click [Power control of controller PC] and then
[Power off], or alternatively, click
A confirmation dialog box will appear.
3. Click [Yes].
The process will be executed.
.
.
.
Status Monitoring Tool
Acquiring and displaying panel status
113