Wx3A W2 Mono With Sub Bass Configuration; Wx3A W3 Mono With Sub Bass Configuration - Martin Audio WX3A User Manual

<
CONTENTS
6.8

WX3A W2 Mono With Sub Bass Configuration

The W2 Active + Sub mono configuration is used to control a single
channel active W2 system when used with a sub-bass (see Fig 11). Active
crossover frequencies (100Hz, 1500Hz), relative output levels, driver
alignment and equalisation are all pre-set for the W2 system plus sub-bass.
Fig 11. W2 Active + Sub configuration using WX3AW2 mono card
6.9

WX3A W3 Mono With Sub Bass Configuration

The W3 Active + Sub mono configuration is used to control a single
channel active W3 system when used with a sub-bass (see Fig 12). Active
crossover frequencies (100Hz, 650Hz), relative output levels, driver
alignment and equalisation are all pre-set for the W3 system plus sub-bass.
Fig 12. W3 Active + Sub configuration using WX3AW3 mono card
>
PRINT
W2 ACTIVE
WS2A
W3 ACTIVE
WS2A
Martin Audio – WX3A System Controller
NOT
WX3AW2 Mono
SUB LF MF/HF
USED
RIGHT/MONO
INPUT
NOT
WX3AW3 Mono
SUB LF MF/HF
USED
RIGHT/MONO
INPUT
12
GUIDES