Safety First; Wt15 - Martin Audio WR2 User Manual

Wavefront theatre series
Table of Contents

Advertisement

<
CONTENTS
3.1
The miniature WT15 is only 11" (280mm) high, yet is capable of producing
extended bandwidth and high output levels. Its twin 5" (125mm) drivers are
arranged in an innovative 2-way configuration in which a 5" (130mm) ICT
(Inductively Coupled Transducer) full-range device is augmented by a
second 5" driver operating over the bass and mid-range region.
The WT15 features externally switchable 4 or 16 ohm operation. Its input
configuration is also switchable, allowing daisy-chaining of cabinets – even
when fed with different input signals.
It is fitted with 3/8" threaded inserts to enable its use on a microphone
stand or with an under-balcony yoke.
3.2
The WT2 is a powerful theatre system which has been designed to meet
the industry requirement for a high performance, compact 2-way system. It
features a 12" (305mm) bass driver and a 70 x 40 degree high frequency
horn. Active or passive operation is selected by a switch on the rear of the
enclosure. The WT2 is capable of extremely smooth reproduction with
good articulation at all power levels.
3.3
The WT3 is an innovative full-range system achieving true three-way
performance from an enclosure only 28" (711mm) high. The low frequency
driver is a powerful 15" (380mm) device cooled by a heat exchange system
to reduce power compression.
Midrange is produced by a unique 6.5" (165mm) mid horn developed to
overcome the power and distortion limitations of traditionally used large
format compression drivers whilst high frequencies are produced by a 1"
(25mm) compression driver. Mid and HF dispersion patterns are 65 x 40
degrees. A switch on the rear panel of the WT3 selects either 3-way bi-amp
(650Hz active and 3.3kHz passive crossover) or full 3-way tri-amp
operation.
4
It is important that loudspeaker systems are used in a safe manner.
Please take some time to review the following points concerning safe use
of Wavefront Theatre Series loudspeakers.
Professional loudspeakers are capable of producing extremely high sound
levels and should be used with care. Hearing loss is cumulative and can
result from levels above 90dB if people are exposed for a long period.
Never stand close to loudspeakers driven at high level.
All material © 2007. Martin Audio Ltd. Subject to change without notice.
>
PRINT

WT15

WT2
WT3

SAFETY FIRST

Martin Audio – WAVEFRONT THEATRE SERIES
3
GUIDES

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wt15Wt3

Table of Contents