Table of Contents
Advertisement
ENGLISH ONLY
<
>
CONTENTS
PRINT
GUIDES
APPLICATIONS GUIDE
Step 4
Roll the next box into position on its wheelboard and lower the frame to
align rear of the flown box with the box on the ground. Remove the quick
release pins from their storage locations and spring out the rear splay arms.
Secure each arm in place in the rear channel of the enclosure above by
inserting a quick release pin into the hole position corresponding to the
cabinet splay angle required.
Safety Note:
Use great care when handling quick release pins, front tongues and
rear splay arms.
Never, in any circumstances, insert a finger or hand into the slot in
the rear splay arm. Never insert fingers or hands between boxes when
chain hoists are moving.
Step 5
Lift the frame to a convenient height.
Step 6
Remove the pins at the front of the fully suspended box to release its
captive tongues. Physically lift the front of the hanging enclosure and locate
the front tongues within its front rigging assembly. Secure the tongues in
position with the quick release pins and remove the wheelboard.
Caution! The weight of the cabinet when lifting should be borne by at
least three people – one either side and one at the front.
10
Martin Audio – W8L Flying System
Advertisement
Table of Contents
