Table of Contents
Advertisement
<
CONTENTS
6
1
1.
Power Switch.
2.
Mains Fuse - Located in a finger-proof fuseholder adjacent to the
mains inlet. Always replace this fuse with the correct type as shown on
the rear panel legend. (N.B. A spare fuse is located in this holder.)
3.
Mains Power - Connected via a standard IEC socket. A compatible
power cord is supplied with the unit.
4.
External - RS232 via a 9-pin DIN DEE socket, for connection to a PC.
5.
XLR Inputs and Outputs - 3 pin XLR connectors are provided for
each audio input and output. All terminations are fully balanced, pin 2
Hot, pin 3 Cold and pin 1 Screen (shield).
>
PRINT
REAR PANEL FUNCTIONS
DO NOT EXPOSE TO RAIN OR MOISTURE
EXTERNAL
CAUTION FOR CONTINUED
PROTECTION AGAINST FIRE
REPLACE ONLY WITH SAME
WARNING THIS EQUIPMENT MUST BE EARTHED
TYPE 11A, 250V FUSE
4
2
3
Martin Audio – DX1 Speaker Management System
APPLICATIONS GUIDE
XLR PIN
OUTPUT 6
OUTPUT 5
OUTPUT 4
OUTPUT 3
P1=SHIELD
P2=HOT
P3=COLD
CAUTION SHOCK HAZARD DO NOT REMOVE COVERS. AVIS RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR. MADE IN THE UK
6
GUIDES
INPUT B
OUTPUT 2
OUTPUT 1
INPUT A
5
Advertisement
Table of Contents
