Advertisement
6.
Attach the WHITE GROUND wire to the trailer tongue or frame. (See Assy. Dia-
gram.)
7.
Mount the two Marker Clearance Lights (2) in the areas shown in the illustration.
Connect each wire from the Marker Clearance Lights to the BROWN wire on each
half of the Split Y-Style Harness (4). (See Assy. Diagram.)
8.
Connect the Split Y-Style Harness (4) Plug to the Color Coded Trunk Harness (5)
Plug. (See Assy. Diagram.)
9.
Turn on the towing vehicle's headlights. The two Stop-Turn-Tail Lights (1) and two
Marker Clearance Lights (2) should turn on. The brighter Stop Lights should turn on
only when the vehicle's brake pedal is depressed, or when the vehicle's turn signal
is activated (ignition key must be in its "on" position).
10.
If the Light Kit fails to illuminate, check all ground connections. If the turn signals on
the Light Kit do not illuminate, check the connections between the towing vehicle's
wiring and the Color Coded Trunk Harness (5). (See Assy. Diagram.)
3
part
Description
1
Stop/tail/turn Light
2
Marker Clearance Light
3
License Plate Bracket
note:
Some parts are listed and shown for illustration purposes only and are not avail-
able individually as replacement parts.
SKU 95974
for technical questions, please call 1-800-444-3353.
assEMbLy DiagraM
6
parts List
Qty
2
2
1
1
2
4, 5
part
Description
4
Split Style Harness
5
Color Coded Trunk Harness
6
Mounting Hardware (1 pkg)
Qty
1
1
1
Page 5
Advertisement
