Table of Contents
Advertisement
Blue Gauge
Blue Hose
Red Gauge
Red Hose
Charging Hose
Materials
Weight
WARNING!! ONLY USE REFRIGERANT R-134A WITH THIS A/C MANIFOLD GAUGE SET.
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
Keep work area clean. Cluttered areas invite injuries.
1.
Observe work area conditions. Do not use tools in damp or wet locations. Do not
2.
expose to rain. Keep work area well lit.
Keep children away. Children must never be allowed in the work area. Do not let
3.
them handle the A/C Manifold Gauge Set.
4.
Store idle equipment. When not in use, the A/C Manifold Gauge Set must be stored
in a dry location to inhibit rust. Always lock up this product and keep it out of reach of
children.
Use the right tool for the job. There are certain applications for which this A/C
5.
Manifold Gauge Set was designed. It will do the job better and more safely at the rate
for which it was intended. Do not modify this A/C Manifold Gauge Set and do not use
this A/C Manifold Gauge Set for a purpose for which it was not intended.
Dress properly. Do not wear loose clothing or jewelry as they can be caught in
6.
moving parts. Protective, electrically nonconductive clothes and nonskid footwear are
recommended when working. Wear restrictive hair covering to contain long hair.
Use eye, ear and hand protection. Always wear ANSI approved impact safety
7.
goggles. Wear an ANSI approved dust mask or respirator when working around
chemical dusts and mists. Wear heavy duty work gloves with working with R134a
refrigerant.
SKU 92649
For technical questions, please call 1-800-444-3353
Specifications
Low Side - 2-1/2" diameter, 0-120 PSI, 0-40 VAC
/
" FFL x 4' 9" with knurled fittings and twist valve with quick disconnect
1
4
High Side - 2
/
" diameter, 0-500 PSI
1
2
/
" FFL x 4' 9" with knurled fittings and twist valve with quick disconnect
1
4
Yellow, high pressure,
/
1
2
Steel, Aluminum, Brass, Acrylic Plastic, High Pressure Hose
4.5 Lbs.
Set includes Quick Disconnect Valves
Note: Accuracy of the Gauge is ± 2%
Save This Manual
Safety Warnings and Precautions
" ACME x 4' 9" with knurled fittings
REV 05f, 09i
Page 2
Hide quick links:
Advertisement
Table of Contents
