Advertisement
Quick Links
mini-tire
changer
model
instructions and
precautions
Please note: Tire not included.
Visit our website at: http://www.harborfreight.com
saVe these
instructions.
read all
precautions and
instructions.
©
Copyright
2009 by Harbor Freight Tools
reserved. No portion of this document or any artwork
contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight
Tools. Diagrams within this document may not be drawn
proportionally. Due to continuing improvements, actual
product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
For technical questions or replacement parts,
please call 1-800-444-3353.
34552
®
. All rights
speciFications
Tire Rim Capacity
Height
Includes
unpacking
When unpacking, make sure that the item is
intact and undamaged. If any parts are missing or
broken, please call Harbor Freight Tools at
1-800-444-3353 as soon as possible.
important saFetY inFormation
1.
Do not exceed max. tire capacity. Do not use on
tires with rims exceeding 12" diameter.
2.
Wear ANSI-approved safety goggles and heavy-
duty work gloves during assembly, mounting and
use.
3.
Use as intended only. This Mini-Tire Changer
has been designed for ATVs, golf carts, and
small car maintenance. Use only with vehicle
tires for which it was designed.
4.
Do not modify Mini-Tire Changer to perform tasks
for which it was not designed.
5.
Use only with accessories included with the Mini-
Tire Changer.
6.
Mount only to a secure, level surface able to
support weight of Mini-Tire Changer and tire
assembly.
7.
Verify that mounting surface has no hidden utility
lines before drilling or driving screws.
8.
Lubricate Breaker Handles (4, 5) when removing
tire from rim; failure to do so can lead to property
damage.
9.
Keep work area clean and well lit.
10.
Keep bystanders out of the area during use.
11.
Do not use when tired or when under the
influence of drugs, medication or alcohol.
12.
This product is not a toy. Do not allow children to
play with or near this item.
13.
Inspect before every use; do not use if parts are
loose or damaged.
14.
Maintain product labels and nameplates. These
carry important safety information. If unreadable
or missing, contact Harbor Freight Tools for a
replacement.
4" to 12" Rim
16"
(2) Bead Breaker Handles
21" Long Mount/Demount Tool
Aluminum Centering Cone
(2) Nylon Spacers
Advertisement
Summary of Contents for CHICAGO 34552
- Page 1 21” Long Mount/Demount Tool Includes Aluminum Centering Cone (2) Nylon Spacers model 34552 unpacking When unpacking, make sure that the item is instructions and intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at precautions 1-800-444-3353 as soon as possible.
- Page 2 Spacers). See Figure 4. Vise Grip (12) Pin (6) Breaker Handle (4) Figure 2 remoVing tire operation Remove balancing weights, if any, from rim Forcing Handle (5) edges. Figure 4 Page 2 For technical questions, please call 1-800-444-3353. SKU 34552...
- Page 3 Raise tire so that lower bead is just under the Demounting Tool over the Locking Nut. See upper lip of the rim. See Figure 6. Figure 8. Clockwise rotation Mounting/Demounting Tool (11) Mounting/Demounting Figure 6 Tool (11) Figure 8 SKU 34552 For technical questions, please call 1-800-444-3353. Page 3...
-
Page 4: Parts List & Assembly Diagram
By THe BUyeR. THe BUyeR ASSUMeS ALL RISK AND LIABILITy ARISING OUT OF HIS OR HeR RePAIRS TO THe ORIGINAL PRODUCT OR RePLACeMeNT PARTS THeReTO, OR ARISING OUT OF HIS OR HeR INSTALLATION OF RePLACeMeNT PARTS THeReTO. Page 4 For technical questions, please call 1-800-444-3353. SKU 34552... -
Page 5: Limited 90-Day Warranty
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 SKU 34552 For technical questions, please call 1-800-444-3353. Page 5...