Epson 7900p - PowerLite XGA LCD Projector Lens Installation page 3

4. Remove the front and rear caps from the new lens.
5. Lower the lens into the projector, making sure the focus and zoom knobs face
downward so they fit through the slot in the projector's case.
Caution: Make sure to support the front of the lens and keep it level, or you could
damage the guide pins. Also, use care not to touch the front or back of the lens. If you
do, clean the lens with a soft, lint-free cloth.
6. Secure the lens with the four mounting screws you removed in step 3.
Guide pin
Make sure focus and zoom
knobs face downward.
3