Switching The Input Signal; Capturing An Image; Stopping The Projection Temporary; Resetting To The Factory Default Settings - Panasonic LB80U - XGA LCD Projector Operating Instructions Manual

Remote control operation

Switching the input signal

You can switch the input method manually by
pressing the COMPUTER, WIRELESS
(PT-LB80NTU/PT-LB75NTU only) and
VIDEO buttons. Press the required button
several times or I H to cycle through the
input methods as follows.
You can confirm the selected input method in displayed
graphical input guide on the upper right of the screen.
Highlighted in yellow is selected terminal. See "INPUT
GUIDE" on page 34.
Pressing the COMPUTER button
COMPUTER1
NOTE:
• Only when the COMPUTER2 SELECT is set to INPUT,
you can switch between COMPUTER1 and
COMPUTER2.
• With no signals from COMPUTER terminals, the
computer connecting guidance will be displayed. See
"Computer connection guidance" on page 46.
NOTE:
• Switched signal may be displayed after a short interval.
• If you select an unplugged input method, the input guidance will blink on and off several times.
• See "List of compatible signals" on page 44.
• See "Connections" on page 17.

Capturing an image

Press the FREEZE button to capture the image
and you can see it as a still picture. While the
image is frozen, the audio sound through the

Stopping the projection temporary

You can stop the projection and audio sound
through the projector temporarily for saving

Resetting to the factory default settings

You can reset most of the customized settings
to the factory defaults by pressing the
DEFAULT button of the remote control. Display
the required sub menu or the menu items and press the
DEFAULT button again.
See "Main menu and Sub-menu" on page 28.
E
NGLISH - 24
COMPUTER2
*1. WIRELESS is only for PT-LB80NTU/PT-LB75NTU.
projector will stop. Press the FREEZE button again to
escape and return to the continuing image.
electrical power. Press the AV MUTE button again to
escape.
NOTE:
• Some menu items are not available to reset by pressing
• To reset all the settings to the factory defaults, see
Pressing the WIRELESS button
The WIRELESS button is only for PT-LB80NTU/
PT-LB75NTU.
See CD-ROM contents for more detailed information.
Pressing the VIDEO button
VIDEO
Pressing the INPUT SELECT button on
the projector
COMPUTER1
*1
WIRELESS
the DEFAULT button. Adjust each menu items
manually.
"INITIALIZE ALL" on page 36.
S-VIDEO
COMPUTER2
S-VIDEO
VIDEO