Table of Contents
Advertisement
Back and bottom view
SERIAL
Connect a compatible cable for
controlling the projector
remotely via your computer.
Connecting terminals
(page 18/page 46)
Security lock
Attach the shackle lock
provided with the projector.
Compatible with the
Kensington MicroSaver
Security System. (page 50)
Air filter (page 41)
NOTE:
• Do not cover the ventilation openings or place anything within 10 cm (4") of them as this may cause damage or injury.
• The projector should only be used with the attached power cord to ensure optimum performance and avoid damage to the
projector.
COMPUTER IN
Connect an RGB signal cable
from your PC.
HDMI IN
Connect HDMI signal cables.
MAIN POWER
Switch the projector on/off
(page 19)
AC IN
Connect the power cord to
supply electronic power to the
projector. (page 19)
Lens cover attachment hole
About Your Projector
S-VIDEO IN
Connect a S-VIDEO signal
cable.
VIDEO IN
Connect an RCA composite
video cable.
COMPONENT IN
Connect YP
P
signal cables.
B
R
Air intake port
Front leg adjusters
Screw up/down to adjust the
projection angle. (page 15)
Lamp unit compartment
(page 41)
E
NGLISH - 13
Advertisement
Table of Contents
