Dell 1420X User Manual page 21

4
TEMP warning light
5
Up / Keystone
adjustment
6
Volume up
7
Right / Auto Adjust
8
Volume down
9
Enter
10 Down
/ Keystone
adjustment
11 Menu
12 Left
/ Source
If the TEMP amber indicator is on or blinking,
one of the following problems could be occurring:
• Internal temperature of the projector is too
high
• Color wheel failure
For more information, see "Troubleshooting Your
Projector" on page 44 and "Guiding Signals" on
page 48.
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+40/-40 degrees).
Press to increase the volume.
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to synchronize the projector to the input
source.
NOTE:
Auto Adjust does not operate if the
on-screen display (OSD) is displayed.
Press to decrease the volume.
Press to confirm the selection item.
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+40/-40 degrees).
Press to activate the OSD. Use the directional
keys and the Menu button to navigate through
the OSD.
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to toggle through Analog RGB, Composite,
Component (YPbPr via VGA), and S-video
sources when multiple sources are connected to
the projector.
Using Your Projector 21